Features • Porting available in 1/8” BSPP or 7/16” SAE in accordance with ISO 1179 & SAE J1926-1 respectively • Constructed from corrosion resistant materials • Compact & lightweight @ only 2.6kg (5.71b) in water • Bracket can accommodate cameras, lights or other subsea sensor devices • Rotational travel of 360 degrees Product Overview The HLK-2200 hydraulic rotary actuator is a rack and pinion design developed for general applications where reliability and durability are important and where a small amount of lash is tolerable. The HLK-2200 is a derivative of the HLK-2150 pan & tilt unit (minus the tilt) and was developed for applications requiring a rotary function only. The cylinder tubes are made of corrosion resistant 316 stainless steel while the body and bracket are manufactured of 6082 aluminium with a 50 micron hard anodized surface. The rotate hydraulic connections are ported into the end of the actuator tubes and are available in 1/8” BSPP in accordance with ISO 1179 and 7/16” SAE in accordance with SAE J1926-1.

Product Specifications General Function Materials Product Finish Seal Material Ports Dimensions Weight in Air Weight in Water Rotary Range Rotary Actuator 316 Stainless Steel, 6082 Aluminium Hard Anodised, Painted Nitrile/NBR/Buna-N, PTFE 1/8" BSPP (ISO 1179) or 7/16” SAE (SAE J1926-1) (H) 180mm x (W) 229mm x (D) 77mm (7.1" x 9" x 3") 3.4kg (7.51b) ~ Hydraulic Requirements Maximum Working Pressure Flow Fluid Type Viscosity Fluid Temperature Cleanliness Requirements Environmental Operational Depth 6000msw (19,680ft) SAAB SEAEYE Email: [email protected] ©SAAB SEAEYE 2019 Revision No. 1...