Catalog excerpts
HyDrive Engineering Pty Ltd began manufacturing hydraulic boat steering equipment in South Australia in 1966, and since that time has been one of the world leaders in boat steering technology. The largest manufacturer in the Southern Hemisphere, HyDrive boasts sales of more than 600,000 units around the world. HyDrive’s huge market in small boat steering systems, has led to increased production facilities, extensive quality control and testing procedures, and considerable investment in product design and development. The range of steering has increased dramatically over the past 20 years...
Open the catalog to page 2HyDrive manufacture a range of steering control options to suit all types of craft. The 8000 SERIES Pedestal unit is a state-of-the-art electronic full follow-up controller which offers an integrated system featuring:- Electronic follow-up wheel control. Non-follow-up joystick for emergency control and rapid docking, Integrated motor controls for single ortwin electric motors. Full alarm monitoring system. Rudder angle display Wheel angle display CM8000 commercial autopilot controller. Provision for GPS / Gyro repeater, Heavy duty construction with grab rails. Twin hinged front doors for...
Open the catalog to page 3DUAL MOTOR POWER PACKS HyDrive DUAL MOTOR Power Packs are supplied as complete modules and are available in various sizes of flow and motor size to suit the steering cylinders and application for each vessel. These dual motor systems are designed for only one motor to operate at a time. The second motor is used only to provide emergency back-up in the event of power failure to the primary motor. Each motor/pump is isolated internally from the other to ensure integrity of supply of the two separate systems. The standard PACK-5 Power Pack includes standard features such as:- High quality...
Open the catalog to page 4SINGLE MOTOR POWER PACKS HyDrive Single Motor Power Packs are supplied as complete modules and are available in various sizes of flow and motor size to suit the steering cylinders and application for each vessel. The Pack-1 Basic system include the following standard features:- Cast Aluminium 25 litre reservoir, Fully Chromate converted and coated in 2-pack polyurethane for maximum corrosion resistance. Single 380/415VAC 4Kw motor and pump assembly with inbuilt relief valve Sight level gauge Filler breather Pressure Gauge Return line filter Standard Versions are also available with...
Open the catalog to page 5HyDrive manufacture a wide range of steering cylinders to suit all types of steering installations. These cylinders are built to meet the toughest requirements of International Survey Societies and to withstand the harshest marine environment. Cylinders can be supplied as individual components for installation by the boat builder, or as complete assemblies with mounting plates and tiller arms to match. 5000 SERIES Standard Cylinders with features including:-Heavy Duty steel construction. Hard-Chromed high tensile piston rods. Polyurethane coated for high protection against the...
Open the catalog to page 6HD-Series 400-12 cylinder - all bronze / stainless steel construction. Fully balanced with field replaceable seals and rod-guides. COMPREHENSIVE RANGE Complete system featuring 5000 Series standard cylinders with Single Plate Tiller arm and mounting plate. EN-Series Nickel Coated cylinder with S/S shaft - maximum corrosion resistance. HD-Series 175-12 cylinder - all bronze / stainless steel construction. Fully balanced with field replaceable seals and rod-guides. TILLER ARMS are made to suit various rudder torques and cylinder sizes / strokes. Several sizes are available and meet all survey...
Open the catalog to page 7HyDrive ENGINE-DRIVEN Power Packs are supplied as complete modules and the basic Pack-7 Model includes the following standard features:-Cast Aluminium 25 litre reservoir. Fully Chromate converted and coated in 2-pack polyurethane for maximum corrosion resistance. Single engine-driven flow-controlled hydaulic pump with in-built relief valve Sight level gauge Filler breather Pressure Gauge Return line filter Low Level Alarm switch Low Pressure Alarm switch High Temperature alarm switch Autopilot solenoid control valve Pressure Compensated Flow Control for speed adjustment of pilot or...
Open the catalog to page 8HyDrive produce a range of versatile DC Power-Packs for use on steering applications and Automatic Pilots. Versions are available with 2-speed outputs on control for use with joy-stick and independent autopilot. As with the larger systems, these are built specifically to meet your own requirements. Standard Systems can be supplied in 12VDC & 24VDC (except Powerkit-12 available as i2voit DC only) with larger voltages also available on request. The HyDrive POWERKIT-12 is 12volt DC system designed to provide state-of-the-art Electronic-hydraulic power steering to handle large horsepower or ,...
Open the catalog to page 95000 SERIES DC Power Packs come in a range of sizes and types to suit most constant duty cycle operation. Because of the variety of steering and control tasks these units are required to do, each system is tailored to suit each application from thebasicdesign. The basic power pack comprises the following features:- 25 Litre cast aluminium tank, fully chromate converted and polyurethane coated for maximum corrosion resistance. Single high performance gear pump direct coupled to motor. Single High performance, constant duty cycle 12vDC or 24vDC Motor with extreme overload protection. Sight...
Open the catalog to page 10HyDrive has a range of helm controls available to complete your power steering system, depending on the application and personal preferences PS-RANGE of Power Assisted Steering helms come in a range of displacements from 50cc/rev to lOOOcc/rev to suit most cylinder combinations. This standard helm provides instant manual back-up in case of power failure. There is no limit to the number of steering stations that can befitted using this range of helm units. The PS-RANGE of helms has an optional TILTING mechanism to provide for adjustable wheel position through a range of angles. Ideal for...
Open the catalog to page 11BASIC SPECIFICATIONS 5000 Series Cylinders Add Stroke Dimensions of 305mm for 12” stroke, and 407mm for 16” stroke for extended length These figures apply to all 5000 Series Standard, SS and EN Series models. It does not apply to HD Series. TORQUE Figures calculated using DUAL cylinders with a system pressure of 1500psi and using a tiller length of 10.6" (270mm) for 12" stroke cylinders, and 14.25" (362mm) for 16" stroke cylinders. These torque figures should not be exceeded for selection of the correct model as this is the Maximum torque the system should be required to generate. ‘VOLUME...
Open the catalog to page 12All Hydrive catalogs and brochures
-
12 VOLT DC POWER STEERING
2 Pages
-
HD Series
9 Pages
-
Outboards & Sterndrives
10 Pages
-
E SERIES ELECTRONIC STEERING
2 Pages
-
HDAdmiral
24 Pages