Catalog excerpts
EMERGENCY JOYSTICK BASIC E-SERIES STAND-ALONE STEERING SYSTEM ENVIRONMENTAL: 0-50degC STEERING COMPATIBILITY:- All solenoid activated power steering units. AUTOPILOT:- All autopilots with solenoid drive outputs POWER CONSUMPTION;- 300mAmps Control current. 2.5amps during solenoid activation ES-801 COMMANDER HELM UNIT CONSTRUCTION:- Heavy duty marine construction with stainless steel wheel shaft, high quality bearings and seals with adjustable wheel tension for heavy seas. TURNS:-3 turns lock to lock with limit stops ES-801C HELM PANEL FUNCTION:- Select helm position for use DISPLAY:- LED indicator of power status and steer status. ALARM:- LED indicator of alarm mode - varying frequency used for diagnostics. DIMENSIONS:- 95mm x 95mm x 55mm MOUNTING:- Panel Mount CABLE:- .5M to helm plus 6M to J/Box. Other sizes available on request ES-802 MINI HELM UNIT CONSTRUCTION:- Compact design includes mini wheel. TURNS:- 270degrees for 90 degree control MOUNTING:- Panel mount - Square bezel optional ES-803 FOLLOW UP LEVER TURNS:- 270degrees for 90 degree control DIMENSIONS:- 95mm x 150mm x 55mm MOUNTING:- Panel mount RAI-1 Rudder Indicator (up to 3 indicators) ACTION:- Spring centred joy-stick type action DISPLAY:- LED’s green and red for direction DIMENSIONS:- 95mm x 150mm x 55mm MOUNTING:- Panel mount ES-804 Non Follow-up lever (up to 3 levers) ES-805 CONTROLLER JUNCTION BOX INPUT VOLTGE:- 12v-24VDC DIMENSIONS:- 250mm X 275mm x 55mm MOUNTING:- Face fix ES-803 Follow-up lever (included in total of 3 follow-up helms) ES-806 RUDDER TRANSDUCER CONSTRUCTION:- Heavy duty marine materials including stainless steel link arm. Note: Two units are required for Independent synchronised rudder control. RAI-1 RUDDER ANGLE INDICATOR INPUT VOLTGE:- 12v-24VDC DIMENSIONS:- 65mm dia MOUNTING:- Panel mount EMERGENCY JOYSTICK Simple 2-directional joystick for panel mounting - supplied with 2 limit switches and special arc-suppression module to allow totally independent control of steering - even if main steering controller is deprived of power. This option is recommended for single engine vessels where no alternative steering system is available E-Series Commander HYDRIVE ENGINEERING PTY LTD 59 Wingfield Road, WINGFIELD South Australia 5013 Tel: 08 82431633 Fax 08 84457938 International: +61 8 82431633 Email: sales@hydrive.com.au Web: www.hydrive.com.au Electronic Steering Electronic Steering STANDARD SPECIFICATIONS:- E-Series Commander Electronic Steering For Catamarans Power Cruisers Motor Yachts 10 metres - 30 metres
Open the catalog to page 1ES-801 COMMANDER helm unit - 3 turns with adjustable wheel brake HyDrive has been a specialist steering manufacturer since 1966 and the long term experience in the technology and requirements of steering are reflected in this 21st Century steer-by-wire addition to our range. The HyDrive E-Series system now offers SuperYacht steering but for smaller boats and provides a very economic installation without complicated and expensive hydraulic circuits - no multiple hoses and valves - vibration control and no need to access leaking fittings. One multi-core cable is all that is required from the...
Open the catalog to page 2All Hydrive catalogs and brochures
-
POWER ASSISTED STEERING
12 Pages
-
12 VOLT DC POWER STEERING
2 Pages
-
HD Series
9 Pages
-
Outboards & Sterndrives
10 Pages
-
HDAdmiral
24 Pages