Catalog excerpts
Admiral Series The HyDrive Admiral Series represents the pinnacle in outboard steering systems providing the highest corrosion resistance and strength of any steering system in its class. There is no direct equivalent from any other manufacturer. Instead of the traditional anodised or coated aluminium cylinder barrels and tiller connections, the Admiral Series cylinders use high quality marine grade brass tubing for the barrels, solid brass end-caps and stainless steel tiller arms and connections. All brass components are further protected by Chrome plating for a high class finish that keeps the steering cylinder free from corrosion and pitting. The Admiral Series cylinders are further protected from electrolysis by intelligent use of insulating materials and technology to electrically isolate the cylinder from the high voltage electrical discharge of the outboard motor’s ignition system. It is the combined use of the best materials and insulation design that provides the most corrosion resistant outboard steering cylinders on the market anywhere. The highly corrosive marine conditions of the tropical areas such as Asia, Northern Australia, Africa and Florida have met their match with the Admiral Series. The Admiral Series comes with the standard 2 year warranty for commercial and leisure use. Separate Data Sheets for each kit are available on this website. TYPICAL KIT Each kit includes the following:Model 401 Helm unit 2 litres Ultra-15 hydraulic fluid 15 metres high-pressure nylon hydraulic tubing The cylinder type of your choice All fittings to suit Bleeding kit All instructions Manufactured in Australia by HyDrive Engineering Pty Ltd 50 Wingfield Road, Wingfield South Austraila 5013 Int Tel +61 8 82431633 Int Fax +61 8 84457938 Email: sales@hydrive.com.au Website: www.hydrive.com.au
Open the catalog to page 1Admiral Series Helms HyDrive, Australia’s largest selling hydraulic steering for small boats, offers the finest in smooth, powerful steering, with quality and materials that are built to last. Large horsepower outboards are handled with comfort and without feedback from engine torque. It doesn’t matter whether you have a small boat with a small outboard, or a larger craft with multiple V-8’s, there is a HyDrive Admiral to suit. Everything you need to handle virtually any boat using outboards, inboards, sterndrives or jet units from 4-15 Metres - delivered in a single carton! OPTIONAL Model...
Open the catalog to page 2Front-mount Cylinders FOR OUTBOARDS BULL-HORN STYLE 211BH Bullhorn Cylinder Powerful all bronze, brass and stainless steel construction sets apart from the others For single outboard motors up to 300HP or twin motors up to 600HP total (counter-rotating), the 211BH is an ideal choice offering the advantage of full hydraulic control of your boat . Installation is simple with the cylinder attaching directly to the front of the outboard motor and supported from the motor’s tilt-tube. The compact design requires only 540mm clearance in the engine-well, considerably less than many of our...
Open the catalog to page 3Front-mount Cylinders BULL-HORN STYLE 211BH-COMPACT The model 211BH-COMPACT Bullhorn cylinder is the latest addition to the new series of cylinders and is designed to replace the Limited-stroke model 212BH - PRO cylinder. As with the original 212BH cylinder - this compact version of the 211BH cylinder is also a limited-stroke cylinder, having the same dimensions overall as the 212BH and also the same reduced stroke of only 7" or 178mm. It should only be used in installations where the standard full-stroke cylinders such as the 211BH and 511BH are too wide to fit into a restricted...
Open the catalog to page 4Side-mount Cylinders 210T Side-Mount Cylinder - can be used on outboards and stern-drives The 210T is designed for installation directly onto the tilt-tube of the outboard motor in the same way as conventional cable steering. It attaches to the outboard motor’s tiller arm using the motor’s existing drag-link. This popular model can handle the same HP as the standard 211BH bullhorn type cylinder. It can also be fitted directly to the steering-cable bracket of a stern-drive (inboard/outboard). The cylinder requires sufficient side clearance to fit, however the hoses remain stationary which...
Open the catalog to page 5HYDRAULIC STEERING FOR OUTBOARD MOTORS Typical steering circuits for outboard motors Bullhorn type cylinders pictured but same circuits can be used on all cylinder types Single station Single engine Single station Dual engine with mechanical tie-bar Single station Single engine with hydraulic autopilot Note: Cylinder fitted to port-side outboard with tie-bar connected to starboard motor. Fitting the cylinder to the port motor ensures the tie bar does not interfere with the tiller arm or mounting plate FOR CATAMARANS Dual station Single engine Single station Dual engine with fluid-link...
Open the catalog to page 6All Hydrive catalogs and brochures
-
POWER ASSISTED STEERING
12 Pages
-
12 VOLT DC POWER STEERING
2 Pages
-
HD Series
9 Pages
-
Outboards & Sterndrives
10 Pages
-
E SERIES ELECTRONIC STEERING
2 Pages
-
HDAdmiral
24 Pages