ML+40-8

ML+40-8

ML+40-8

Product catalog summary
Application
This compact linear actuator is designed for smaller or lighter yachts with space constraints and lower thrust needs, suitable for sailing yachts up to 45 feet (15 m).

Description
The ML+40-8 actuator, with a full extension length of 840mm, is ideal for tight spaces. It features a 1.5-litre pump and a 50w motor, delivering up to 350kg of thrust while drawing only 14 amps. This makes it compatible with smaller course computers, offering an economical solution for smaller vessels. The unit integrates all hydraulic circuit elements and includes relief and anti-cavitation valves. It comes with a quick-release mounting and M12 tiller bolt, along with necessary fasteners.

Features
  • Pre-filled for easy installation
  • Low profile and compact length
  • Low power consumption
  • Environmental protection rated IP67
  • Integral relief and anti-cavitation valves
  • Quick release mounting
  • Low back-drive
  • Marine environment protective finish
  • Low maintenance and user serviceable
  • Service kits and spares available

Technical Data
  • Voltage: 12 VDC
  • Typical Current: 1.3 A (60 kg at 25% duty), 14.0 A (350 kg intermittent)
  • Hard-over time: 12 seconds (nominal)
  • Volume: 234cc
  • Ingress protection: IP67
  • EMC Protection: BS EN 60945:2002 (DC)
  • Ignition Protection: BS EN 28846:1993
  • Operating Temperature: -15 to +55°C
  • Max Operating Thrust: 350 kg (intermittent)
  • Orientation: Red lead to positive extends, Black lead to positive retracts
  • Clutch coil: 12 watt
  • Clutch connection: DIN 43650 (6-8 mm cable)
  • Fluid: ISO VG10 to VG40 hydraulic mineral fluid to ISO 6743-4 HV
  • Suitable fluids: Fuchs Renolin B 15 HV1, Seastar HA5430
  • Weight: 8 kg

Contact Information
Hydraulic Projects Ltd, Exeter Road, DAWLISH, Devon, EX7 0NH, UK
Telephone: +44 (0) 1626 863634
Fax: +44 (0) 1626 866283
Email: [email protected]
Website: www.hypro.co.uk
See more

Catalog excerpts

ML+40-8-1

ML+40-8 COMPACT LINEAR ACTUATOR 200mm STROKE Application This new compact unit is designed for smaller or lighter yachts with space restrictions and lower thrust requirements. Depending on vessel weight, sail plan and rudder forces the new actuator is suitable for sailing yachts of up to 45 feet (15 m). Description The ML+40-8 at full extension is only 840mm long allowing it to be mounted in tighter confines than the standard ML+40. It combines our 1.5 litre pump and 50w motor which develops up to 350kg of thrust whilst typically drawing only 14 amps. This allows it to be used with smaller course computers making this an economical solution for the smaller vessel. The compact actuator comes with all the advantages of its larger stable-mate the ML+40. All the elements (pump, cylinder and reservoir) of a hydraulic circuit come together in one compact unit. It also contains integral relief and anti-cavitation valves as standard. Features Pre-filled for easy installation Low profile Compact length Low power consumption Environmental protection to IP67 Integral relief and anti-cavitation valves. Quick release mounting. Low back-drive Marine environment protective finish. Low maintenance. User serviceable. Service kits & spares available. It comes supplied with a special quick release mounting and M12 tiller bolt along with all the necessary fasteners and fixings. The ML+40-8 has an environmental protection rating of IP67 and conforms to BS EN 60945 for EMC and BS EN 28846 for ignition protection.

 Open the catalog to page 1
ML+40-8-2

Circuit Diagram Technical Data Voltage 12 VDC Typical Amp-hour Typical Current 60 kg at 25% duty Intermittent 350 kg Hard-over time (Nominal) 12 seconds Ingress protection IP67 EMC Protection BS EN 60945:2002 (DC) Ignition Protection BS EN 28846:1993 Ambient operating Temperature -15 to + 55 deg C Max Operating Thrust 350 kg (Intermittent) Orientation Clutch coil Clutch connection Fluid Red lead to positive - Extends Black lead to positive - Retracts 12 watt DIN 43650 (6-8 mm cable) ISO VG10 to VG40 hydraulic mineral fluid to ISO 6743-4 HV The following commercial fluids are suitable: Fuchs Renolin...

 Open the catalog to page 2
ML+40-8-3

Hydraulic Projects Ltd Exeter Road DAWLISH Devon EX7 0NH UK Telephone: Fax: E-mail: Web site:

 Open the catalog to page 3

Archived catalogs

  1. WINCH VALVE

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.