Inboard Thru-Hull mounted azimuth Hydraulic Thrusters

1 / 1 PageView full catalog

Inboard Thru-Hull mounted azimuth Hydraulic Thrusters

Product catalog summary

Specifications Data

In-Board Drive Mount Assembly

Features:

Tough and durable design that is compact and easy to install.
Triple-sealed hull mounting plate with O-rings, which can be welded or bolted.
High reliability with no gearboxes or transmissions required.
Corrosion-resistant coatings and ultra-high density polyethylene bushings for longevity.
Compatible with existing hydraulics or new installations.
Customizable drive tube length and multiple horsepower ranges available.
Linkable steering at 90° for multiple drives.
5-year warranty on materials and workmanship.

Specifications:

Constructed with Schedule 80, 1/2” thick pipe.
Hot-dip galvanized housing for bushings and drive tube with machined fit on all parts.
1/2” thick ultra-high density polyethylene bushings and 70 durometer O-ring seals.
Machined steel seal plate measuring 3/4” x 1 1/2”.
Dimensions: 21” outer diameter x 36” tall.
12-bolt flange with 1” stainless steel bolts provided.
Dry weight of 500 lbs, excluding the drive.

Available Options:

Horsepower ranges: 50-125hp, 130-175hp, 200-300hp.
Gear-to-gear steering available at 180°.

Catalog excerpts

Inboard Thru-Hull mounted azimuth Hydraulic Thrusters-1

Specifications Data In-Board Drive Mount Assembly - Tough-Durable Proven Design - Compact, Easy to install - Triple-sealed hull mounting Plate (with O-rings), Weld-able Gear Boxes or transmissions to worry about - Corrosion Resistant coatings - Ultra-high density polyethylene Bushings for long life - Use existing hydraulics or install - Drive tube length Customer - Multiple Horsepower Ranges multiple drives - 5 Year Materials and Workman ship warranty Inboard Hydraulic Drive Assembly Partial top view and side view - Sch. 80 - 1/2" thick pipe used throughout - Hot-Dip Galvanized housing for bushings and Drive tube. Machined fit on all parts! - 1/2" Thick Ultra High Density Polyethylene Bushings - 70 Durometer O-rings Seals. - 3/4" X 1 1/2" thick, machined Steel Seal Plate -12 Bolt Flange with 1" Stainless Steel Bolts provided - Dry weight - 500 lbs. (excluding drive) Available Options: - Gear to gear steering (180°) Inter-connect Collar Lifting Ring Lower Drive Steering Motor Hull mounting plate Marine Systems Ship Hull Plate

Open the catalog to page 1

All Hydraulic Marine Systems, Inc. catalogs and brochures