HullWiper Component & Filter Specifications Brochure

Product catalog summary

Overview: The HullWiper is a marine cleaning device designed to efficiently clean ship hulls without damaging anti-fouling coatings. It operates using sea water and is built to Norwegian offshore standards.

Features: The HullWiper can clean up to 2000 m² per hour, is operational 24/7, and offers fast mobilization and demobilization. It is known for its power and stability.

Technical Specifications:

Dimensions: 330 cm (L) x 170 cm (W) x 85 cm (H)
Weight: 1200 kg
Max Depth: 100 m
Power Input: 690 Vac, 3 phase, 60 Hz, 37 kW
Hydraulic Power: 195 l/min at 130 bar
Thrusters: 8 hydraulic thrusters, 3 Hp each
Water Pump Capacity: Up to 980 l/min
Camera: CMOS Sensor with 1280 x 800 resolution and IR capabilities

Surface Equipment: Includes a power control cabinet, surface viewing system, Kevlar armoured umbilical, high-pressure pump, cleaning unit, and diesel generator.

Filter and Recovery Design: The system includes a filter bag and manages inlet flow pressure between 50-400 bar, with an outlet flow of approximately 400 l/min.

Legislative Position: According to IMO 2000 vs IMO 2008 directives, ships with SPC anti-fouling are subject to copper leakage regulations. Ports with high ship traffic may experience significant environmental impacts due to copper oxide release.

Documentation: Includes legislative summaries, environmental impact assessments, and water sample reports.

Catalog excerpts

HullWiper Component & Filter Specifications Brochure-1

HullWiper hullwiper.co Component & Filter Specifications

Open the catalog to page 1

HullWiper Component & Filter Specifications Brochure-2

1. Features • Cleans up to 2000 m2/hour • Does not damage the anti-fouling • Uses sea water as a médium for hull cleaning • Extremely good power and stability • Fast mobilisation / demobilisation • Made in Norway according to Norwegian offshore standards 2. Frame Stainless steel, tube structure 5. Buoyancy Solid cell structure 6. Power input 690 Vac, 3 phase, 60 Hz, 37 kW 8. Hydraulic power Flow 195 l/min 130 bar compensated with an overpressure of 0.5 bar 9. Hydraulic oil Standard is 32 hydraulic oil but the system can use all types of hydraulic oil 10. Thrusters 8 hydraulic...

Open the catalog to page 2

HullWiper Component & Filter Specifications Brochure-3

4. Filter and recovery design Inlet flow pressure between 50-400 bar Surrounding harbour water (reference point mg/L) Outlet flow approximately 400l/min - 24m3/hour 5. The Legislative Position Key Points Summary IMO 2000 vs IMO 2008 Leakage to the sea According to IMO 2000 vs IMO 2008 directives, ships sailing in international waters with SPC anti-fouling are subject to have a daily maximum leakage of copper of (55) 200μg/cm2/day. This produces a daily leakage of approximately (5.5 kg) 20kg of pure copper oxide on a ship with an underwater area of 10,000sqm within the current legislation. A ship...

Open the catalog to page 3

HullWiper Component & Filter Specifications Brochure-4

6. Documentation • Anti-fouling, The Legislative Position Key Points Summary IMO 2000 • Anti-fouling, The Legislative Position Key Points Summary IMO 2008 • NIVA Memo 3rd Update • AMTP0028 - Resubmission 24/02/2013 • Water Samples

Open the catalog to page 4

HullWiper Component & Filter Specifications Brochure-5

HullWiper PO Box 17041 Dubai United Arab Emirates [email protected] Tel: +971 4 805 9153

Open the catalog to page 5

All HullWiper catalogs and brochures

HullWiper Brochure
3 Pages