Wiring_Catalog_AA10
1Pages

{{requestButtons}}

Catalog excerpts

Wiring_Catalog_AA10 - 1

Marine Products 30A Ship-to-Shore Devices 30 Amp 125 Volt Shore Power Inlets and Outlet Traditional, stainless steel shore power inlet has easy-to-wire terminations. Interior is transparent for quick and easy visual inspection. Interior is shielded from the elements by a gasketed, self-closing cover, watertight when cover is screwed in place. Mounting holes are 2.38 in. (60.3) on centers. Mounting screws and gasket included. Protective rear enclosure/strain relief also included. • Friction tight self-closing cover assures the interior is shielded from the elements when the inlet is not in use • Neoprene gasket on underside of cover. For sealing when the cover is closed • Mirror stainless steel finish for superior appearance Housing Design • Base and cover are #316 type stainless steel for strength and corrosion resistance • Threaded base for making a watertight seal. When in use, it mates to the threaded ring of the weatherproof cover on the connector body; when not in use, it mates to the threaded cover Interior Design • Contact blades are nickel plated brass for corrosion resistance • Mounting holes are 2.38 in. (60.3) on center • Polycarbonate interior has superior heat resistance Terminations • Easy-to-wire interior is transparent for quick, visual inspection of terminations • #SR3050 protective rear enclosure cap attaches to contact carrier with 3 screws W 30A 125V Twist-Lock® Devices Description Catalog Number Stylized UV resistant non-metallic shore power inlet has white Centrex® cover which makes unit weatherproof when completely closed. Interior has easy-to-wire terminations and is transparent for quick and easy visual inspection. Mounting holes are 2.38 in. (60.3) on centers and match existing mounting patterns. Mounting screws and gasket included. Protective rear enclosure/strain relief also included. IP55 SUITABILITY. Traditional, stainless steel shore power inlet has easy-to-wire terminations. Interior is transparent for quick and easy visual inspection. Interior is shielded from the elements by a gasketed, self-closing cover, watertight when cover is screwed in place. Mounting holes are 2.38 in. (60.3) on centers. Mounting screws and gasket included. Protective rear enclosure/ strain relief also included. IP56 SUITABILITY. Traditional stainless steel inlet housing; blank for attaching a circuit breaker (not included). Mounting hardware for Carling series breakers included. IP56 SUITABILITY. Stylized non-metallic inlet housing; blank for attaching a circuit breaker (not included). Mounting hardware for Carling series breakers included. IP55 SUITABILITY. Protective rear cover. Fits all 30A shore power inlets. Secures to back of inlets with three screws which are provided. Replacement interior for HBL303SS and 60CM61 shore power inlets. Traditional stainless steel power outlet has gasketed, self-closing cover, watertight when cover is screwed in place. Mounting holes are 2.38 in. (60.3) on centers. Mounting screws and gasket included. IP56 SUITABILITY. Nickel plated brass adapter plate for mounting 30A traditional style shore power inlets and outlets to FS/FD box. Note: *Not UL Listed or CSA Certified. Centrex® is a registered trademark of LANXESS Corporation. ® Wiring Device-Kellems

Open the catalog to page 1

All Hubbell Marine Electrical Products catalogs and brochures

  1. Floor Boxes

    1 Pages

  2. Accessories

    1 Pages

  3. netSelect

    1 Pages

  4. HBL332C6W

    1 Pages

  5. HBL332B6W

    1 Pages

  6. HBL316CRCX

    1 Pages

  7. HBL26CM10

    1 Pages

  8. HBL316P6W

    1 Pages

  9. HBL316C6W

    1 Pages

  10. HBL316R6W

    1 Pages

  11. HBL316B6W

    1 Pages

Archived catalogs

  1. Marine Catalog

    56 Pages