Watertight Plug Features One piece non-metallic housing provides impact and chemical resistance in an insulated body Solid one-piece pins for reliable electrical contact Gasketed sealing ring provides watertight seal Heavy duty external cord grips for maximum cord retention Ordering Information Description Watertight IEC Pin and Sleeve Mating Plug Listings UL Listed, File E146032 CSA Standard C22.2 No. 182.1 UL Classified to IEC60309-1 Specifications Housing Locking Ring Sealing Gasket Retainer Terminal Screws PBT PBT Solid Neoprene High-Impact Thermoset Stainless Steel Performance Electrical Current Interrupting Dielectric Voltage Max. Working Voltage Mechanical Impact Resistance Product Identification Terminal Identification Environmental Flammability Ingress Protection Moisture Resistance Operating Temperature Certified for current interrupting at full rated current Withstands 3,000V AC Min 600V AC RMS Per CSA C22.2 No.182.1 /UL1682 Identification and ratings are a permanent part of the device housing. Terminals identified in accordance with North American and IEC conventions V-0 3R,3RX,4X,IP68,IP69K IEC 60309-1 Maximum Continuous 75°C; Minimum - 40°C w/o impact Complementary Products Closure Cap Cord Clamp and Locking Ring Liquidtight Adapters Online Resources Customer Sales Drawing eCatalog Installation Instructions Dimensions in Inches (mm) Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 Phone (800) 288-6000 • Fax (800) 255-1031 • Specifications subject to change withou