HUBBELL WIRING Marine Products The only 200 Amp-rated Ship-to-Shore System - built specifically for Mega-Yachts. FEATURES Type 3, 4, 4X rated per UL50 standard for superior water resistance. Interchangeable with other "UL1682" listed devices. Terminal screws feature swivel/pressure pads to secure, and prevent damage to, conductors strands. Cable clamp captures cable at four points, provides superior retention. Housing is made of copper-free aluminum with an electrostatically applied epoxy/polyester finish. Accepts a cord range of #1 AWG – 250 MCM. Pins and Sleeves are made of nickel-plated Tellurium copper for superior corrosion and heat resistance. Hubbell was the first to offer a marine-ized UL listed 100 AMP Ship-To-Shore System… and now, we are the first to offer a marine-ized, UL listed 200 AMP Ship-To-Shore System. Hubbell 200 Amp devices are listed to UL 1682 and UL Classified for the mating and operation of 200 Amp devices with Crouse-Hinds® and Appleton®. Ship-to-Shore Selection Chart Boatside

HUBBELL WIRING 200A 600V Ship-to-Shore Devices Description Catalog Numbers Gray metallic watertight shore power inlet with wingnut-secured lid for water tightness when not in use. Gray/yellow metallic watertight connector body with locking ring to make inlet/connector body interface watertight. Cord range is #1 AWG-250 MCM (0.653 max. conductor diameter). Gray/yellow metallic watertight plug with locking ring to make plug/receptacle interface watertight. Cord grip range is #1 AWG-250 MCM (0.653 max. conductor diameter). Gray metallic, watertight dockside receptacle with wing nut-secured lid for...