IEC Pin and Sleeve 16A, 220-240V, 2 Pole, 3 Wire Watertight Receptacle Features • Corrosion-resistant self-closing gasketed cover • Sequential contact engagement to prevent a momentary over-voltage on components * Super tough insulated non metallic house for impact and chemical resistance * Color coded housings for easy identification * Multi contact spring provides and maintains high unit pressure on mating pins to minimize temperature rise Ordering Information Description UPC Catalog Number Receptacle Device Color Blue Standards UL Listed, File E146032 CSA StandardC22.2 No. 182.1 UL Classified to IEC 60309-1 IEC 60309-2 Specifications Housing Mounting Flange Cover Gaskets Cover Screw Performance Electrical Current Interrupting Dielectric Voltage Max. Working Voltage Temperature Rise Zytel® 101 Nylon Zytel® 101 Nylon Reinforced Thermoplastic Polyester Solid Neoprene Nickel-plated brass HUBBELL Mechanical Impact Resistance Product Identification Terminal Identification Environmental Flammability Ingress Protection Moisture Resistance Operating Temperatures Certified for current interrupting at full rated current 3000V AC 600V RMS Max. 30°C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% Per CSA C22.2 No.182.1 /UL1682 Identification and ratings are a permanent part of the device housing Terminals identified in accordance with North American and IEC conventions HB or better per UL 94 or CSA C22.2 No. 0.17 IP67 Suitability Watertight per IEC 60309-1 Maximum Continuous 75°C; Minimum - 40°C w/o impact Accessories Back Boxes Cover Assemblies Online Resources Customer Use Drawing eCatalog Installation Instructions Dimensions in Inches (mm) Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 Phone (800) 288-6000 • Fax (800) 255-1031 • Specifications subject to change without notice.