IEC Pin and Sleeve 16A, 220-240V, 2 Pole, 3 Wire Watertight Plug Features • One piece non-metallic housing provides impact and chemical resistance in an insulated body * Solid one-piece pins for reliable electrical contact * Gasketed sealing ring provides watertight seal when matedwith receptacle or connector • Heavy duty external cord grips for maximum cord retention Description UPC Catalog Number Plug Device Color Blue Standards UL Standard UL1682 and UL 1686C2 CSA Certified File LR280C UL Classified to IEC 60309-1 IEC 60309-2 Specifications Housing Locking Ring Sealing Gasket Retainer Terminal Screws Zytel® ST801 Nylon Reinforced Thermoplastic Polyester Solid Neoprene High-Impact Thermoset Stainless Steel Performance Electrical Current Interrupting Dielectric Voltage Max. Working Voltage Mechanical Impact Resistance Product Identification Terminal Identification Certified for current interrupting at full rated current 3000V AC 600V RMS Per CSA C22.2 No.182.1 /UL1682 Identification and ratings are a permanent part of the device housing Terminals identified in accordance with North American and IEC conventions Environmental Flammability Ingress Protection Moisture Resistance Operating Temperatures HB or better per UL 94 or CSA C22.2 No. 0.17 IP67 Suitability Watertight per IEC 60309-1 Maximum Continuous 75°C; Minimum - 40°C w/o impact Accessories Closure Cap Cord Clamp and Locking Ring Liquidtight Adapters Online Resources Customer Use Drawing eCatalog Installation Instructions Dimensions in Inches (mm) Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 Phone (800) 288-6000 • Fax (800) 255-1031 • Specifications subject to change without notice.