*mynauticexpo

Catalogs
Hubbell Marine Electrical Products
Fiber Optic Cable Pulling Grips Pulling Grips

Fiber Optic Cable Pulling Grips Pulling Grips

Product catalog summary

Overview
Hubbell Wiring Device-Kellems provides wire management products, specifically focusing on fiber optic cable pulling grips. These products are designed to meet the stringent requirements of fiber optic applications, offering high strength and positive holding power through galvanized steel mesh.

Features
The pulling grips are made from galvanized steel mesh, ensuring high strength and durability. The multiweave mesh design provides positive holding power, making it suitable for various applications.

Ordering Information
The product discussed is a pulling grip for loose tube fiber optic cable, with the catalog number PFOLT312.

Specifications

Eye Length: 6.3 inches (16.00 cm)
Strand Length: 22.5 inches (57.15 cm)
Eye Diameter: 0.20 inches (0.51 cm)
Lug Diameter: 0.51 inches (1.30 cm)
Diameter Range: 0.312-0.625 inches (0.79-1.59 cm)
Maximum Approximate Breaking Strength: 3,000 lbs (13,344 N)

Safety Information
Kellems emphasizes the importance of selecting the correct grip for specific cable diameters and ensuring the grip's strength is adequate for the intended load. The safety factor recommended is five for pulling grips and ten for support grips. Users must consider various factors such as tension, diameter, and operating conditions to ensure safety and effectiveness.

Recommendations
Users should determine the cable's outside diameter, select the appropriate grip size, and consider the working load compared to the grip's breaking strength. It is crucial to replace grips as needed, especially when conditions are not well defined or when there is a risk of injury.

Catalog excerpts

Fiber Optic Cable Pulling Grips Pulling Grips-1

Features • Galvanized steel mesh provides high strength • High strength multiweave mesh for positive holding power Description Product Type UPC Catalog Number Pulling Grip, For Loose Pulling Grips 783585342153 PFOLT312 Tube Fiber Optic Cable Online Resources eCatalog Specifications Eye Length Strand Length Eye Diameter Lug Diameter Diameter Range Maximum Approximate Breaking Strength Please review all SAFETY INFORMATION for grips on the following page. IMPORTANT Dimensions in Inches (mm) Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 Phone (800) 288-6000 • Fax (800) 255-1031 • Specifications subject to change without notice.

Open the catalog to page 1

Fiber Optic Cable Pulling Grips Pulling Grips-2

Fiber Optic Grip Safety Information Kellems has wide experience with grips for use with fiber optic cable. As the industry leader in producing wire mesh grips for the stringent requirements of fiber optic applications, Kellems has developed several series of grips for use with fiber optic communications cable. These grips include pulling grips with built in swivels, grips with steel ends to protect fragile cable ends, grips with low profiles to pull cables in tight places and the OPTISOK® an effective tool to place preterminated cables. Also available are grips to support fiber optic cable. Select...

Open the catalog to page 2

All Hubbell Marine Electrical Products catalogs and brochures

Archived catalogs

Marine Catalog
56 Pages