Relative pressure transmitter for mobile hydraulic Type 512
1 / 5Pages

Pressure transmitter Relative pressure transmitter for mobile hydraulic Type 512 The pressure transmitter type 512 with cable connection meets the highest demands of industrial and mobil hydraulic applications. This sensor is available with protection standard IP 69K. The standard pressure orifice prevents damage due to pressure peaks. The compact and rugged design meets the requirement of shock- and vibration stability according Kfz-norm ISO 16750. The pressure transmitter type 512 guarantees highest EMC stability according to various Kfz regulations with test level up to 100V/m. The measuring cell is based upon the Huba Control developed thick film technology on stainless steel and is fully hermetically welded. + Compact and rugged construction for highest operational reliability + Welded construction – no elastomer seals + Negligible temperature influence on + Excellent EMC-capacity + Rugged PUR cable with IP 69K Huba Control Type 512 | Technical data subject to change | Edition 09/2020

Technical Overview Pressure range Relative Operating conditions Medium Medium Ambient Storage < 400 bar > 400 bar < 400 bar > 400 bar Pressure connection Sensor Temperature Tolerable overload Rupture pressure Materials Case Cable Materials in contact with the medium Electrical overview Stainless steel 1.4404 / AISI 316 L PUR Stainless steel 1.4404 / AISI 316 L Stainless steel Current consumption < 23 mA < 7 mA < 7 mA < 7 mA < 7 mA 1000 VDC Short circuit proof and protected against polarity reversal. Each connection is protected against crossover up to max. supply voltage. 2 wire 3 wire...

Order code selection table in bar Output / power supply Electrical connection /16 -20 UNF sealed at back SAE-4 with O-Ring seal FPM ¼ -18 NPT G ¼ sealed at back DIN EN ISO 1179-2 with profile seal FPM M14x1.5 sealed at back DIN EN ISO 1179-2 with profile seal FPM R ¼ acc. EN 10226 9 /16 -18 UNF sealed at back SAE-6 with O-Ring seal FPM Outside thread Pressure range variation (optional) Indicate W and state range on order (e.g. W0... + 300bar/Out1...8V) Order code selection table in psi Output / power supply Electrical connection /16 -20 UNF sealed at back SAE-4 with O-Ring seal FPM ¼ -18...

Accessories (supplied loose) Order number Mounting bracket with screw Heat sink with outside thread G ½ sealed at front - inside thread G ¼ Heat sink with outside thread G ¼ sealed at front - inside thread G ¼ Calibration certificate Heat sink Mounting bracket Dimensions in mm / Electrical connections Attention: min. bending radius cable PUR > 15x cladding-Ø brown white Huba Control Type 512 | Technical data subject to change | Edition 09/

Headquarters Schweiz Vestiging Nederland Niederlassung Deutschland Office United States of America Succursale France Branch Office United Kingdom Unit 13 Berkshire House, County Park Business Technopôle Forbach-Sud Centre, Shrivenham Road