TT/SILICONE/TR

TT/SILICONE/TR

Product catalog summary
Specifications:
The document outlines the specifications for a food-grade silicone hose. It complies with several standards, including the American F.D.A. 177.2600, Italian D.M. no. 220 dated 21/03/1973, and 1935/2004/CE. The temperature range for the hose is between -40˚C and +200˚C.

Construction:
The hose is a one-layer, transparent silicone product that is resistant to abrasion, heat, weathering, and most chemicals. It is non-toxic and has a smooth extruded surface. The specific weight is 1.180 g/cm3, hardness is Shore 65 +/- 5, breaking load is 8 MPa, stretching is 300%, tearing resistance is 15 KN/m, and compression set is 40% after 22 hours at 175˚C. The material is composed of methyl-vinyl-polysiloxane reinforced with fumed silica.

Customization:
Other diameters and pressures can be manufactured upon request. The characteristics and technical data are subject to change without notice.

Dimensions and Weights:
The document provides a table with various inside and outside diameters, theoretical weights, and lengths in both metric and imperial units. For example, a hose with an inside diameter of 3 mm (1/8 inch) and an outside diameter of 6 mm (1/4 inch) has a weight of 0.019 kg/m (0.013 lbs/ft) and a length of 50 meters (164 feet).
See more

Catalog excerpts

TT/SILICONE/TR-1

Tubo in SILICONE Trafilato alimentare. Food one-layer SILICONE hose. Normative di riferimento: • Normativa americana F.D.A. 177.2600. • Decreto Ministeriale 21/03/1973 e successivi aggiornamenti. • 1935/2004/CE e successivi aggiornamemti. Standards: • American regulations F.D.A.177.2600. • Italian regulations D.M.no. 220 dtd 21/03/1973. • Trafilato: tubo monoestruso in SILICONE trasparente alimentare resistente all’abrasione, al calore, agli agenti atmosferici e a gran parte dei prodotti chimici. • Hose: One-layer, abrasion, heat, weathering and most chemicals resistant non toxic transparent silicon. Peso specifico (UNI 7092-A): g/cm3 1,180 Durezza (UNI EN ISO 868) Shore 65 +/- 5 Carico di rottura (UNI 6065): MPa 8 Allungamento a rottura (UNI 6065): 300 % Resistenza alla lacerazione (ASTM 0 624/B): KN/m 15 Compression Set Sch.25% 22h a 175˚C (UNI ISO 815): 40% Specific weight (UNI 7092-A): g/cm3 1,180 Hardness (UNI EN ISO 868) Shore 65 +/- 5 Breaking load (UNI 6065): MPa 8 Stretching (UNI 6065): 300 % Tearing (ASTM 0 624/B): KN/m 15 Compression set Sch.25% 22h a 175˚C (UNI ISO 815): 40% I manufatti dopo vulcanizzazione e post-vulcanizzazione risultano composti da: METIL-VINIL-POLISILOSSANO rinforzato da SILICE ottenuta per virogenesi. Products after vulcanization are compounded by: METYLVYNYL-POLISYLOSSAN strengthened by FUMED SILICA. • Superficie: liscia estrusa. • Surface: smooth extruded. DIAMETRO INTERNO INSIDE DIAMETER DIAMETRO ESTERNO OUTSIDE DIAMETER Altri diametri e/o pressioni realizzabili su richiesta - Le caratteristiche e i dati tecnici possono essere modificati senza preavviso. REV. 2 PESO TEORICO WEIGHT LUNGHEZZA LENGTH Other diameters and/or pressures are feasible upon request - The charact

 Open the catalog to page 1

All Hoses Technology catalogs and brochures

  1. RETIN/TR

    1  Page

  2. STEAM/AL

    1  Page

  3. ALIMPOMP/F

    1  Page

  4. VIGNAPOMP/R

    1  Page

  5. SPURPOMP/V

    1  Page

  6. AGRIPOMP/SP0

    1  Page

  7. FLATPOMP/20

    1  Page

  8. FLATPOMP/10

    1  Page

  9. FLATPOMP/L

    1  Page

  10. FLATPOMP/B

    1  Page

  11. INDUPOMP/10

    1  Page

  12. AIR/10NL

    1  Page

  13. SCAMO/CORD

    1  Page

  14. SCAMO/SP/CAJ

    1  Page

  15. O.B. MOTOR

    1  Page

  16. RETIN/CARBO

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.