NMEA COMPONENTS

Product catalog summary

NMEA 2000® Signal Supply Cable
The cable transmits information signals from the onboard engine computer to the NMEA cable connection in the boat. Available in two lengths: 9.8 ft (06653-ZZ3-730HE) and 19.5 ft (06653-ZZ3-760HE).

NMEA 2000® Relay Kit
This kit ensures proper 'Key On' power distribution from the boat's 12-volt system to the NMEA 2000® network. It includes specific wiring instructions for connection to the Honda Key Switch or Side Mount Control Box. Applicable models and serial numbers are provided in a chart.

NMEA 2000® Starter Kit
Includes backbone/extension cables, power node, terminators, and tee connectors. Note that the signal supply cable for the outboard motor is not included.

NMEA 2000® GPS Antenna
Connects to any NMEA 2000 backbone and communicates with devices on the same network. Includes a dash gasket and mounting screws.

NMEA 2000® Network Cable
Used for network extension or connection to additional network devices. Available in 2-foot (06328-ZZ3-730AH) and 15-foot (06328-ZZ3-760AH) lengths.

NMEA 2000® Power Node
Provides power to the NMEA backbone by connecting directly to the power source. Tee Connector sold separately.

NMEA 2000® 120 Ohm Terminator
Terminators are essential for network integrity, with one male and one female required per network. Do not exceed two terminators per network.

NMEA 2000® Single Tee Connector
Used to join the power cable and NMEA 2000 devices into the network's backbone.

NMEA 2000® Fuel Level Adapter
Allows standard resistance type fuel sending units to interface with NMEA 2000 instruments. Preconfigured for Tank 1 or Tank 2.

NMEA 2000® Fuel Data Manager
Stores data for fuel usage and is compatible with the NMEA 2000 HD-4 Multi-function color display. Supports up to three engines, with additional managers required for more engines.

Catalog excerpts

NMEA 2000® Signal Supply Cable The cable supplies the information signals from the onboard engine computer to the NMEA cable connection in the boat. NMEA 2000® Relay Kit This kit provides correct 'Key On' power distribution to the NMEA 2000® network direct from the boat's 12 volt system. • Red to boat's 12 VDC+ • White/Black to NMEA 12 VDC + input • Black to Black on Honda Key Switch or Side Mount Control Box • Black/Yellow to Black/Yellow on Honda Key Switch or Side Mount Control Box • See the chart to the left for applicable models and serial numbers. 9.8 ft. long NMEA 2000® Signal Supply Cable

Open the catalog to page 1

NMEA 2000 Network Cable, 2 Foot NMEA 2000 120 Ohm Terminator, Male NMEA 2000® Starter Kit Includes one 2-foot backbone/ extension cable, one 15-foot backbone/ extension cable, one power node, one each male and female terminator, and two tee connectors. Does not include signal supply cable for outboard motor. NMEA 2000® GPS Antenna Connects to any NMEA 2000 backbone and communicates with any NMEA device on the same network. Includes dash gasket and two mounting screws. Tee Connector sold separately. NMEA 2000® Network Cable Includes one NMEA 2000 network cable for network extension or connection...

Open the catalog to page 2

NMEA 2000® Fuel Level Adapter Allows standard resistance type fuel sending units to interface with NMEA 2000 instrument through the NMEA backbone. Adapters come preconfigured for Tank 1 or Tank 2. NMEA 2000® Fuel Data Manager The Fuel Data Manager stores data for fuel used, trip fuel used, and seasonal fuel used from any compatible engine or engine interface connected to your NMEA 2000 network. Compatible with NMEA 2000 HD-4 Multi-function color display only. A single Fuel Data Manager can support up to three engines (3). For installations of more than three engines, use a second Fuel Data Manager....

Open the catalog to page 3