BATTERY MANAGEMENT Battery Distribution Cluster Single Outboard Motor Battery Distribution Cluster Dual Outboard Motor The Single Engine Battery Distribution Cluster includes dedicated battery switches for each bank and a voltage sensitive relay (VSR). The VSR allows for two or more batteries to be charged at the same time. When the engine is started and the start battery reaches 13.7V, the relay closes combining batteries allowing them to be charged simultaneously. A red LED indicator light on the VSR will turn on when in the closed charging mode. When the engine is stopped and the voltage drops to 12.8V, the relay will open separating the batteries. This eliminates the possibility of draining the wrong battery and also protects sensitive electrical equipment from harmful engine start-up spikes. Dual Engine Battery Distribution Cluster has the same features as the Single Cluster but designed for twin engine installations. The assembly includes Port Start, Starboard Start, Emergency Parallel and House battery switches, and two voltage sensitive relays. Battery Distribution Cluster, Dual Outboard Motor Battery Disconnect Switch Used in battery distribution clusters. Tested to UL 1107 and rated at 275A continuous, 455A intermittent, and 1250A cranking. Each switch has four removable sides suitable for up to 1/0 wire size for easy cable attachment. Requires 3/8-inch (10mm) terminal connector. Battery Disconnect Switch Measures 51 ½” x 5 ½” x 3 ¼”. Battery Distribution Cluster, Single Outboard Motor Battery Distribution Studs Battery Distribution Cluster Triple Outboard Motor Triple Engine Battery Distribution Cluster has the same features as the Dual Cluster but is designed for triple engine installations. The assembly includes Port Start, Center Start, Starboard Start, Emergency Parallel and House battery switches, and three voltage sensitive relays. Battery Distribution Cluster, Triple Outboard Motor © 2020 American Honda Motor Co., Inc.—All rights reserved Kit includes 2 each — 3/8” (10mm) studs mounted in a plastic housing with removable access doors for unlimited battery cable routing options. Used to connect additional battery cables to extend the length of the standard engine battery cable. Studs are tin-plated copper with tinplated brass nuts with stainless steel lockwashers. Plastic housing is high temperature and impact rated polycarbonate. Kit includes stainless steel mounting hardware. Housing measures 2 ¾” x 2 ¾” x 2" Battery Distribution Studs

BATTERY MANAGEMENT Battery Tender—Outdoor Optimate 3 Battery Charger This compact 800 mA battery charger has all the charge characteristics of the indoor battery tender but designed for outdoor usage. Includes quick connect cable pictured. The OptiMate 3 battery charger will automatically recover, monitor, and maintain all types of batteries from 2.5 to 32 amp-hours with its advanced diagnostic program, so your Honda generator is always ready to start when you need it. The OptiMate 3 battery charger has a unique ability to desulfate and recover most batteries that have been neglected or deeply...