WINCHES A larger diameter in the drum means more traction on the rope and more efficiency in self-tailing. Larger internal body diameter allows the use of aluminium and thinner walls resulting in a much lighter part. Low profile and less weight, reaching 20% less in the #44. All winches bigger than the #44 present a roller bearing around the base resulting in a much more stable body, independent from the origin of the load. All shafts use roller bearings or highly-resistant autolubricated synthetic bushing. Self tailing and self-adjusting for a variety of rope diameters. Off-centre axle means more space for gears with the same base diameter the winch delivers greater mechanical advantage. This is a plus in high-load action and even allows the use of a shorter handle in lighter winds. First gear 1525% higher allows a longer period of ‘pumping’ before using the second gear. W IN C H R A N GE HT94066 HT94054 HT94040 P ­ art no. Fixing Size HT94032 HT94048 HT94016 HT94044 HT94008 Drum Gearing Ratio 1 Dia. (mm) Ratio 2 Ratio 3 Weight (g) Drum Base Bearing Fixing Size Line Dia. Overall Base Height Dia. (mm) Dia. (mm) (mm) (mm) Height (mm) (mm) HT94066 8 220 45:1 9:1 29:1 69:1 15,000 268 245 8x8 10-16 260 120 HT94054 8 158 22:1 22:1 57.8:1 - 11,200 215 190 6x8 10-14 210 90 HT94048 8 115 13:9 49 6,620 188 80 8-12 182 82 45.8:1 5,350 168 6x8 8-12 172 82 42 3,650 146 62.5 8-12 151 70 140 112 6x6 8-12 145 67 HT94044 8 HT94040 8 114 12:1 95 16.7:7 15:2 - 146 HT94032 8 94 8:1 17.8:1 36.9:1 - 3,600 HT94016 8 94 4:1 17.8:1 - - 3,100 140 112 5x6 6-10 130 53 HT94008 8 67.5 1:1 8:1 - - - 105 64 3x6 6-10 105 37 39 www.holt.eu