tracks-and-travellers
4Pages

RECIRCULATING  14/22MM MAINSAIL CARS RECIRCULATING  32MM MAINSAIL CARS ­ ERGO DESIGN Low profile aluminium traveller cars are CNC’d from solid marine grade aluminium and hard anodised. 1 4 MM R EC I R C U L A T ING   CA R S SAIL TRIM See page 34­for track lengths 3 2 M M RE C I RC U L AT I N G  C ARS 14MM Recirculating Track 14 9 HT4414 HT95659 HT91651 HT91653 HT91697 HT91652 HT4416 HT4415 2 2 MM R EC I R C U L A T ING   CA R S 22MM Recirculating Track HT95658 HT91642 HT91640 HT91048 HT91561 HT91665 HT91644 HT91666 HT91668 HT91682 HT91696 HT91667 See page 34 for track lengths HT91672 HT91048 Part No. HT4414 HT4415 HT4416 HT91642 HT91645 HT91647 PORT HT91648 STBD Description 14MM Tie on car 14MM Mainsheet car 14MM Catamaran car High load 80mm car w / pivoting shackle and ears Weight (g) 65 165 145 192 Track Width (mm) 14 14 14 22 Part No. Description HT91653 190mm car w / two stand-up base accepts HT91682 & HT91696 HT91651 HT91643 Weight (g) Track Width (mm) SWL (kg) Break Load (kg) Line Dia (mm) 110mm car with stand-up base accepts HT91682 & HT91696 1100 32 2300 5000 - 2.5-4 HT95659 Track end control 4:1 / 5:1 w / cleat - port 628 32 1350 3000 - 680 32 600 1200 3.5-6 HT91697 10 Track end control 4:1 / 5:1 480 32 600 1200 10 3.5-6­­­ HT91652 120mm car with stand-up base accepts HT91682 & HT91696 872 32 1900 4000 - - HT95658 Track end control 4:1 / 5:1 w / cleat - Stbd 680 32 600 1200 10 Coupler for two 110mm cars 280 32 3000 6000 - HT91695 SWL (kg) 200 200 200 350 Break Load (kg) 400 400 400 600 HT91506 Line Dia (mm) HT91644 80mm car w / stand-up base and ears 110 22 350 600 - HT91561 HT91672 Control 3:1 vertical lead 110 22 150 300 8 HT91048 Add to HT91682 or HT91696 for 5:1 purchase 80 - 200 400 - HT91048 Add to HT91682 or HT91696 for 5:1 purchase 80 - 200 400 - HT91640 80mm car w / pivoting shackle 172 32 230 500 - HT91645 120mm car w / stand-up ears 150 22 560 1100 - HT91665 95mm car w / pivoting shackle and eyes 455 32 800 1600 - HT91647 PORT Track end control 4:1 with cleat - Port 460 22 220 450 10 HT91668 190mm car w / pivoting shackle - accepts HT91682 & HT91696 1010 32 2300 5000 - HT91648 STBD Track end control 4:1 with cleat - Stbd 460 22 220 450 10 HT91666 110mm car w / pivoting shackle - accepts HT91682 & HT91696 600 32 1350 3000 - HT91643 120mm car w / pivoting shackle and ears 259 22 560 1100 - HT91682 On the car side sheave 4:1 / 5:1 230 32 600 1200 10 8 HT91667 130mm car w / pivoting shackle - accepts HT91682 & HT91696 710 32 1900 4000 - - HT91696 On the car stacked sheave 4:1 - 5:1 218 32 600 1200 10 HT91695 HT91506 33 Track end control 4:1 / 5:1 Coupler for two 80mm cars (HT91644) 280 80 22 - 150 600 300 1000 www.holt.eu 34

SLIDING­CARS RECIRCULATING­GENOA CARS PIN STOP TRI-ROLLER CAR Large pinstop minimises play, maximising cleating stability. Aluminium cast body with moulded sliders that fits this sliding car to recirculating track. Also suitable to retro fit on other manufacturers tracks. FULL MOULDED CAR Advanced single piece moulded car, integral rails eliminates excessive play. 14 9 OPTIMUM FOOTPRINT Extended footprint gives minimal clearance creating a rigid platform for the width of track SAIL TRIM 2 5 MM S L I D I N G T RA CK  &   CA R S RE C I RC U L AT I N G & T RI   ROL L E R GE N OA  C ARS­  NEW...

BATTEN CAR SYSTEM - BIG BIG  B A T T EN C A R  SY STEM S­ SINGLE HANDED OPERATION The recirculating cars allow easy single handed loading of the sail luff tabs. The spring loaded retainer is depressed allowing the release of the pin (without letting it fall out). 100 95515 258,9 91536 SAIL TRIM 95511 Sliding cars use the same recirculating track as ball bearing cars for the big and small versions. Sliding cars are easily removed from the track using a track gate. Track Gate 60 40,2 BIG SILIDING CAR FROM 45 TO 70 FEETS MONOHULS UP TO 55 MULTI 23 63,4 Small Track Gate for Ball Bearing Cars...

BATTEN CAR TRACK SLUGS TRACK SLUG Track is able to be attached to existing mast luff groove using a range of track slugs. Made from aluminium and tapped for easy retro fit attachment. Part No. Slug Size HT91550 Ø 8mm X Thread 3/16” HT91551 Ø 10mm X Thread 1/4” HT91552 Ø 10mm X Thread M6 HT91553 Ø 11mm X Thread 1/4” HT91554 Ø 11mm X Thread M6 HT91555 Ø 11mm X Thread M5 BATTEN CAR SYSTEM - SMALL 3,2 BIG  B A T T EN C A R SY STEM S­ 51 74 164 134 91508 91506 50 SMALL SLIDING CAR UP TO 38 FEETS MONOHULS UP TO 40 MULTI 20 95510 61 176 HT91511/512 24 HT91502 119 59 95503 91502 H191508 HT91906...