*mynauticexpo

Catalogs
Holt
Shackles and Rigging

Shackles and Rigging

Product catalog summary

Overview: The document outlines technical specifications and applications for stainless steel shackles, primarily used in marine environments. These shackles are made from AISI316 stainless steel, known for its excellent corrosion resistance, and are available in various configurations including D-shackles, long D-shackles, anchor shackles, and halyard shackles.

Specifications:

Materials: The casting material is AISI316 - DIN 1.4408, and the forging material is AISI316 - DIN 1.4401.
Surface Treatment: Electro polished (E.P.) for enhanced corrosion resistance.
Safety Factor: The standard safety factor for working load is 1/4 of the breaking load.

Types of Shackles:

D-Shackles: Available in standard, collared pin, and locking pin configurations for quick manual setup and release.
Long D-Shackles: Designed for applications requiring a long reach opening, with collared and locking pins for secure tightening.
Anchor Shackles: Used for quick assembly of multiple connecting links, with collared and locking pins to prevent accidental pin dropping.
Halyard Shackles: Designed for marine applications with quick release and anti-dropping features.

Applications:

Marine Environments: Suitable for high-sea environments and high tower/pole locations where secure pin retention is critical.
Public Places: Hexagonal sink pin shackles are designed to prevent malicious tampering.
Vibration Resistance: Wide D-shackles are designed for applications requiring large openings and resistance to wind/vibration.

Key Data:

Breaking Load (B.L.) varies by size and type, ranging from 400 kgs to 10,000 kgs.
Sizes range from 4 mm to 32 mm in diameter, with corresponding breaking loads and applications.

Technical Specifications:
- Casting Material: AISI316 - DIN 1.4408
- Forging Material: AISI316 - DIN 1.4401
- Surface Treatment: Matte Finished (M.F.) or Electro Polished (E.P.)

Field of Application:
- Designed for pipe turnbuckles, toggles, and jaws to provide a circular appearance while concealing threads for aesthetic purposes.

Safety Factor:
- Standard safety factor for working load is 1/4 of the breaking load.

Product Details:
- S3125: Toggle - Cast, available in various sizes with accessories like rings and cotter pins.
- SF312P: Jaw - Forged, designed for pipe turnbuckles, jaw, and jaw applications.
- SF7801: Right threaded stud terminal, designed for loose wire rope ends, requires proper swaging.
- SF7803: Swage fork, designed for swaging of loose end wire ropes.
- S3400: Turnbuckle toggle, designed for 180-degree movement in corresponding size turnbuckles.
- SF3171: Round ring (center cross bar), designed for assembly into various fittings, made by TIG Argon welding.

Key Parameters:
- Various sizes and breaking loads are specified for each product, with detailed dimensions and thread sizes.
- Accessories include rings and cotter pins, depending on the product type.

Recommendations:
- Ensure proper swaging with a swaging machine for applicable products.
- Refer to specific load characteristics for detailed safety and application guidelines.

Specifications:
1. Materials: The document specifies the use of AISI304 and AISI316 stainless steel for various components, with corresponding DIN standards (1.4308, 1.4408, 1.4301, 1.4401).
2. Production Methods: Components are either cast or forged, with surface treatment through electro polishing ("E.P.").
3. Safety Factor: The standard safety factor for working load is 1/4 of the breaking load, applicable across different components.

Components and Technical Data:
1. Lifting Eye Nut (S3061): Available in sizes M6 to M12, with breaking loads ranging from 1,100 to 3,500 kgs.
2. Round Ring (SF317): Made by TIG Argon welding, with breaking loads from 650 to 8,500 kgs. Deformation load is approximately 1/5 of the breaking load.
3. Toggle (B3125): Left and right threaded toggles for assembly with turnbuckles, with breaking loads from 500 to 10,000 kgs.
4. Lifting Eye Bolt (S307): Includes washer and nut, with breaking loads from 1,100 to 8,000 kgs.
5. U-Bolt (SF413): Designed for flat panel assembly, with breaking loads not specified.
6. Snap Shackles (S2478, S2482, S2483): Various designs with breaking loads from 400 to 3,500 kgs.
7. T-Terminal and T-Plate (SF8282, SF510): Used in yacht mast assemblies, with specific dimensions and breaking loads.

Field of Application:
1. Lifting Eye Nut and Bolt: Used for lifting applications, ensuring secure assembly with threaded rods.
2. Round Rings: Suitable for assembly into various fittings.
3. Toggles: Used with turnbuckles, requiring careful selection of thread direction.
4. U-Bolts: Serve as pulling rings when assembled onto flat panels.
5. Snap Shackles: Designed for quick load release in various applications.
6. T-Terminal and T-Plate: Essential for proper fitting in yacht mast assemblies.

Notes and Recommendations:
1. Safety Factor: Always consider the safety factor of 1/4 of the breaking load for working loads.
2. Deformation Load: For round rings, assume deformation load at around 1/5 of the breaking load.
3. Thread Selection: Ensure correct selection of left or right-hand threads for toggles and other threaded components.

Catalog excerpts

HtBNJNautos S360 D-shackle HS360CP, SF360CP D-shackle (collared pin) HS360LK, SF360LKF (forged) D-shackle (locking pin) Field of application D-Shackles are designed for application where quick manual setup/release assembly pins are required Field of application D-shackles (locking pin) are designed for application where accidental dropping of pin must be avoided during operation. Ex. high sea enviroment or high tower/pole locations. S360CI Allen key Technical Data Forging material : AISI316 - DIN 1.4401 Production : S360CI - Shackle - Cast P Pin - Forged Surface treatment : "E.P. 11 (Electro polished) Field of application Shackles (hexagonal sink pin) are designed for application in puplic places where direct malicious manual tampering may occure. Note:(1) Standard safety factor for working load iis1/4ffiifbbreaking load.

Open the catalog to page 1

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S370 - Shackle - Cast Pin - Forged Surface treatment : "E.P. 11 (Electro polished) Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S362 - Shackle - Cast Pin - Forged Surface treatment : "E.P. 11 (Electro polished) Field of application Anchor shackles are designed for application where quick assembly of multiple connecting links are anticipated. Field of application Long D-shackles are designed for application where a quick setup...

Open the catalog to page 2

Copyright Sinox Marine 2010, all rights reserved Copyright Sinox Marine 2010, all rights reserved S365LK Halyard shackle (locking pin) Screwdriver Screwdriver Wrench Wrench item no. item no. Material Material a Technical Data Technical Data Casting material : Casting material Forging material : Forging material Surface treatment Surface treatment : Production : Production AISI316 - DIN 1.4408 AISI316 - DIN 1.4401 "E.P. (Electro polished) P "E.P. " (Electro polished) Shackle Cast S362B - Shackle - Cast Pin - See chart Pin See chart : S362C - Shackle - Cast Shackle Cast Pin - Forged Pin Forged...

Open the catalog to page 3

miUNautos HS380 Twist shackle HS380CP Twist shackle (collared pin) Technical Data Casting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4401/ AISI316 - DIN 1.4301 Production : S0182 - Swivel - Cast Pin - Forged Surface treatment : "E.P." (Electro polished) Field of application Twist shackles and Twist shackles with locking pin are designed for application where a 90° angle twist setup is required. S260 Wire rope clip (AISI standard) Technical Data Casting material : AISI304 - DIN 1.4308/ AISI316 -DIN 1.4408 Forging material : AISI304 -DIN 1.4301 / AISI31...

Open the catalog to page 4

Quick link S7360 Triangle quick link Triangle S2450X, SF2450X Snap hook (with eye) Technical Data Technical Data Forging material : AISI316 - DIN 1.4401 Forging material d S7350 - Link -: Forged - Link - Forged S7350 Production Production : Forged S Surface treatment : "E.P. " (Electro polished) Surface treatment "E.P. (Electro polished) P Material Material Field of application Field application Snap hooks are the standard in use for the assembly for Snap hooks are standard of two loose end chain or ropes. two loose ropes. Snap hooks eye) are to Snap hooks (with eye) are the standard in use to...

Open the catalog to page 5

Technical Data Technical Data Forging material : AISI316 - DIN 1.4401 Forging material Production : SF312P - Jaw - Forged Jaw Forged Production J Accessory See chart Accessory - See chart Surface treatment : "M.F. " (Matte finished) Sur face treatment "M.F. (Matte Field application : SF312P g dField of application - Jaw - Forged Pipe turnbuckles, jaw and jaw are See chart for Pipe turnbuckles, jaw Accessory - designed for A jaw are circular appearance turnbuckle concealing d S circular appearance of turnbuckle while concealing : SF312P - Jaw - Forged g the threads within the pipe-fSee chart threads...

Open the catalog to page 6

HtBNTNautos Threaded stud terminal SIZE L L1 M OD Dia 0 Cable Accessory SF7801 Imperial Right threaded stud terminal SIZE Dia 0 cable L L1 L2 M OD (mm/inch) (mm/inch) (mm) (mm) (mm) (thread) (mm) Field of application Pipe turnbuckles, jaw and swage stud are designed for tightening of one loose end to a wire rope. The wire rope must be swaged properly with a Field of application Right threaded stud terminals are designed for loose wire rope ends. Terminals must be properly swaged with swaging machine. Note:'2' Standard safety factor for working load is 1/4 of breaking...

Open the catalog to page 7

miUNautos B3125/L Left threaded toggle B3125/L, B3125/R Technical Data Forging material : AISI316 - DIN 1.4401 Production : B3125/L - Toggle - Forged Accessory - See chart B3125/R - Toggle - Forged Accessory - See chart Surface treatment : "E.P." (Electro polished) Field of application Threaded toggles are designed for assembly with the turnbuckles or other fittings together. Selection of left hand or right hand thread must be carefully checked. Material AcceSS°ry Field of application rings (center cross bar) are designed for assembly into manyfittings. 4ings creall made by TIG Argon welding....

Open the catalog to page 8

Technical Data Technical Data Casting material Casting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ Forging material AISI316 - DIN 1.4401 Thread Forged Production Production : S307 - Thread - Forged Bolt - Cast Bolt Cast Sur face treatment "E.P. (Electro polished) Surface treatment : "E.P. " (Electro polished) P Field of application Field application Lifting eye bolt washer for better Lifting eye bolt (with washer and nut) for better gripping during assembly. Threaded rod are TIG gripping during assembly. Threaded rod are Argon welded to the casting...

Open the catalog to page 9

B S2464/S2466/S2468 Snap shackle item no. Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 : S2464, S2466, S2468 , S246 Shackle - Cast Surface treatment : "E.P." (Electro polished) P. Technical Data Technical Data Hook - Cast Terminal - Forged Terminal - Forged (2) : S Note: Standard safety factor for working load : S is 1/4 ofRight handload. R : breakingR thread : Right hand thread : Left hand L L thread : Left hand thread (3) Standard safety factor for working load is 1/4 of breakingF . load : AISI316 - DIN 1.4408 : AISI316 - DIN 1.4401 : S2831...

Open the catalog to page 10

Shackles and Rigging

Shackles and Rigging

Catalog excerpts

All Holt catalogs and brochures

Archived catalogs