Clamcleats®

Product catalog summary

Overview: This document provides detailed specifications and instructions for various models of Clamcleat products, specifically focusing on the CL826 Aero base and associated cleats. These products are designed for high-load and demanding conditions, suitable for rigging on ropes.

Specifications:

CL826 Aero Base: Allows alloy cleats to be rigged on a rope, suitable for high loads. Available in different models with silver or hard anodised finishes.
Weight and Dimensions: The cleats vary in weight from 35g to 60g, and are suitable for rope diameters ranging from 2mm to 8mm.

Product Variants:

CL826-11 and CL826-11AN: Aero cleat with CL211 Mk2, available in silver and hard anodised versions.
CL826-18 and CL826-18AN: Aero cleat with CL218 Mk2, available in silver and hard anodised versions.
CL826-17 and CL826-17AN: Aero cleat with CL217 Mk2, available in silver and hard anodised versions.

Additional Products:

Link Loks: Available in various sizes for different rope diameters, designed for easy rigging and adjustment without tools.
Special Cleats: Include modifications for specific applications, such as umbrellas or training dinghies.
Auto-release Cleat: Designed to release the rope when a set load is exceeded, adjustable for different release loads.

Materials: Cleats are made from materials such as aluminium, nylon, and polypropylene, each chosen for specific applications and conditions.

Applications: These cleats are used in various marine applications, including sailing, windsurfing, and other water sports, where precise holding power and durability are critical.

Installation and Use: The document provides guidance on rigging and adjusting the position of cleats on ropes, emphasizing ease of use and adaptability to different conditions.

Catalog excerpts

Aero Cleats Cleats rigged on a rope Aero Cleats Allow aluminium cleats to be rigged on a rope, for higher loads or demanding conditions. Easy to rig. The position of cleat on the rope can be adjusted without using tools. CL826 Aero base instructions Other hand is CL826-17 (with CL217 Mk2 silver) CL826-17AN (with CL217 Mk2 hard anodised) Aero Cleats Three sizes of Aero base can be fitted with a variety of cleats. Please ask for details. CLAM CLEATS Link Loks

Open the catalog to page 1

Special rivets are available for the CL211 Mk2, if required. SIDE ENTRY CLEATS FOR ROPES TO 6MM Keeper automatically prevents unwanted cleating Rope runs free Keeper is closed to stop rope going into cleat teeth Pull rope back and down to cleat Keeper opens to allow rope into teeth Mount on flat or curved surface Tested for thousands of cycles under harsh conditions CLAM CLEATS

Open the catalog to page 2

Windsurfing Cleats The CL712 has been designed to snap-fit into a plastic moulding to combine the strength of an alloy cleat with the lower cost of a moulded component. CL244 Insert Cleats for ropes to 6mm CL244L Aluminium Insert Cleat with Fairlead Cl825CKC allows you to add an extra cleat without drilling more holes. Just remove the CL211 MK1 and fit the CL825CKC, using the same fastenings. Ideal for training and club use on Laser dinghies. The cleat flips up to release the rope when a set load is exceeded. The CL257 is easily reset or adjusted for different release loads, even out on the water....

Open the catalog to page 3

The CL221 is supplied complete. Other cleats are available with or without backplates and rivets. The CL212A prevents the CL212 snagging in shrouds or other parts of the rigging. CLEATS FOR 6 - 12MM ROPES Sail Cleats and Line-Lok™ SPRING GATE CLEATS CLAM CLEATS CL258 Racing Fine Line (Starboard) CL241AN Racing Sail Line Cleat CL241 Racing Sail Line Cleat CL233 Sail Line Cleat CL221 Dingy Leech Line Cleat CL214W Fine Line Cleat (Starboard) CL212 Leech Line Cleat CL259AN Racing Fine Line (Port) CL258AN Racing Fine Line (Starboard) CL259 Racing Fine Line (Port) SPRING GATE CLEATS

Open the catalog to page 4

Clamcleats®

Clamcleats®

Catalog excerpts

All Holt catalogs and brochures

Archived catalogs