Product Data HEMPADUR 15500 15500: BASE 15509: CURING AGENT 97580 Description: HEMPADUR 15500 is a two-component, amine adduct cured phenolic epoxy (novolac) paint, which cures to a coating with excellent resistance to a wide range of chemicals as tabulated in separate CARGO PROTECTION GUIDE. Recommended use: As a tank lining. 150°C/302°F Service temperature: Maximum, dry exposure only: 160°C/320°F In seawater (no temperature gradient): 50°C/122°F. Wet service temperatures, other liquids: Consult the corresponding CARGO PROTECTION GUIDE. Certificates/Approvals: Complies with Section 175.300 of U.S. Federal Regulations in respect of carriage of foodstuff (FDA) for tanks larger than 2006 m3/530,000 US gallon. Availability: Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Surface dry: Dry to touch: Fully cured: VOC content: Shelf life: 11150* / Light grey Flat 68 ± 1 6.8 m2/l [272.7 sq.ft./US gallon] - 100 micron/4 mils 26 °C [78.8 °F] 1.7 kg/litre [13.9 lbs/US gallon] 2 - 3 approx. hour(s) 20°C/68°F 4 - 6 hour(s) 20°C/68°F 10 day(s) 20°C/68°F (see REMARKS overleaf) 321 g/l [2.7 lbs/US gallon] 1 Year for BASE and 3 years for CURING AGENT (stored in closed container) (25°C/77°F) from time of production. Depending on storage conditions, mechanical stirring may be necessary before usage. - *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version, mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life: Induction time: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: Date of issue: July 2012 - 15500 BASE 15509: CURING AGENT 97580 8.9 : 1.1 by volume. 93.8 : 6.2 by weight Airless spray / Brush 08450 / 08450 According to separate APPLICATION INSTRUCTIONS 3 hour(s) 20°C/68°F minutes 20°C/68°F (see REMARKS overleaf) 0.018 - 0.021 " 200 bar [2900 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S TOOL CLEANER 99610 100 micron [4 mils] (see REMARKS overleaf) 150 micron [6 mils] According to separate APPLICATION INSTRUCTIONS According to separate APPLICATION INSTRUCTIONS Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Page: 1/2 Product Data Sheet

HEMPADUR 15500 SURFACE PREPARATION: Steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to very near white metal Sa 2½3 (ISO 8501-1:2007) with a surface profile corresponding to Rugotest No. 3, BN10, or ISO Comparator Rough Medium (G). According to separate APPLICATION INSTRUCTIONS APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. Use only where application and curing can proceed at temperatures above: 10°C/50°F....