Product Data HEMPADUR 15400 15400: BASE 15409: CURING AGENT 95100 Description: HEMPADUR 15400 is a two-component, amine adduct cured epoxy paint, which cures to a coating with excellent resistance to a wide range of chemicals as tabulated in separate CARGO PROTECTION GUIDE. Recommended use: As a tank lining. Service temperature: Maximum, dry exposure only: 140°C/284°F In water (no temperature gradient): 50°C/122°F Wet service temperatures, other liquids: Consult the corresponding CARGO PROTECTION GUIDE. Certificates/Approvals: Tested for non-toxicity of welding fumes by the Danish Welding Institute Complies with Section 175.300 of U.S. Federal Regulations Tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain. Availability: Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Surface dry: Dry to touch: Fully cured: VOC content: Shelf life: 10000* / White. Semi-flat 48 ± 1 6 m2/l [240.6 sq.ft./US gallon] - 80 micron/3.2 mils 26 °C [78.8 °F] 1.4 kg/litre [12 lbs/US gallon] 3 approx. hour(s) 20°C/68°F 8 - 10 hour(s) 20°C/68°F 7 day(s) 20°C/68°F 463 g/l [3.8 lbs/US gallon] 1 year for BASE and 3 years for CURING AGENT (25°C/77°F) from time of production. Depending on storage conditions, mechanical stirring may be necessary before usage. - *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version, mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life (Airless spray): Pot life (Brush): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: Date of issue: August 2012 - 15400 BASE 15409: CURING AGENT 95100 4 : 1 by volume Airless spray / Brush 08450 (5%) / 08450 (5%) According to separate APPLICATION INSTRUCTIONS 2 hour(s) 20°C/68°F 4 hour(s) 20°C/68°F 0.021 " 200 bar [2900 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S TOOL CLEANER 99610 80 micron [3.2 mils] see REMARKS overleaf 175 micron [7 mils] According to separate APPLICATION INSTRUCTIONS According to separate APPLICATION INSTRUCTIONS Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Page: 1/2 Product Data Sheet

HEMPADUR 15400 SURFACE PREPARATION: Steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to near white metal Sa 2½ (ISO 8501-1:2007) with a surface profile corresponding to Rugotest No. 3, BN10a, Keane-Tator Comparator 3.0 G/S, or ISO Comparator Rough Medium (G). APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. Use only where application and curing can proceed at temperatures above: 10°C/50°F. Maximum relative...