Product Data HEMPEL'S ANTIFOULING GLOBIC 9000 78900 Description: HEMPEL’S ANTIFOULING GLOBIC 9000 is a low friction, self-smoothening SPC antifouling with a high solids content. The nano-capsule acrylate copolymers are the main binder which in combination with a powerful bioactive mixture makes it suitable for protection on vessels operating in aggressive fouling waters. The highly controlled self-polishing is made possible by hydrolysis and the nano-capsule acrylates finetuned interaction with seawater. The nano-capsule acrylate binder technology is patented like the innovative formulation of inorganic fibre reinforcement which ensures an extraordinary mechanical strength. Recommended use: As a selfpolishing antifouling for newbuilding and maintenance of bottom and boottop on deep-sea going vessels operating at low to medium speed for Extended Dry Docking (EDD) up to 90 months. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26). Aluminium hulls: see REMARKS overleaf. Availability: Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: VOC content: 51110* / Red see REMARKS overleaf Flat 58 ± 1 5.8 m2/l [232.6 sq.ft./US gallon] - 100 micron/4 mils 23 °C [73.4 °F] 1.9 kg/litre [15.7 lbs/US gallon] 4 - 5 hour(s) 20°C/68°F 380 g/l [3.2 lbs/US gallon] - *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Application method: Thinner (max.vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: Date of issue: August 2012 - Airless spray, see REMARKS overleaf 08080 (5%) / 08080 (5%) Use under exceptional circumstances only 0.027 - 0.031 " 270 bar [3915 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 100 micron [4 mils] see REMARKS overleaf 175 micron [7 mils] According to specification. According to specification. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Page: 1/2 Product Data Sheet

HEMPEL'S ANTIFOULING GLOBIC 9000 78900 SURFACE PREPARATION: According to specification. Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitable detergent, followed by high pressure fresh water cleaning for a thorough removal of any possible weak structure of leached antifouling. Sealer: Whether to use a sealer coat/tiecoat or not depends on the type and condition of the existing antifouling. APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate...