Product Data HEMPEL'S ANTIFOULING OLYMPIC+ 72950 Description: HEMPEL'S ANTIFOULING OLYMPIC+ is a high solids selfpolishing antifouling based on acrylic binders. The robust rosin technology combined with a good biocide package ensure predictable antifouling protection. The patented microfibers give OLYMPIC+ a best-in-class mechanical strength to avoid cracking and peeling. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26). For both newbuildings and maintenance of underwater hull and boottop for up to 36 months drydocking interval. Certificates/Approvals: Availability: Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Surface-dry: Through-dry: VOC content: Shelf life: 51110* / Red see REMARKS overleaf Flat 63 ± 1 6.3 m2/l [252.6 sq.ft./US gallon] - 100 micron/4 mils 24 °C [75.2 °F] 1.7 kg/litre [14.2 lbs/US gallon] 15 minute(s) 20°C/68°F 2 hour(s) 20°C/68°F 365 g/l [3 lbs/US gallon] 3 years (25°C/77°F) from time of production. *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Application method: Thinner (max.vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: Airless spray see REMARKS overleaf 08080 (5%) Use under exceptional circumstances only 0.027 - 0.031 " 270 bar [3915 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 100 micron [4 mils] see REMARKS overleaf 175 micron [7 mils] According to specification. According to specification. Date of issue: October 2018 Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.

Product Data HEMPEL'S ANTIFOULING OLYMPIC+ 72950 SURFACE PREPARATION: According to specification. Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitable detergent, followed by high pressure fresh water cleaning for a thorough removal of any possible weak structure of leached antifouling. Sealer: Whether to use a sealer coat/tiecoat or not depends on the type and condition of the existing antifouling. APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide...