Catalogs >
Hempel >
Hempel's Silvium 51570

Hempel's Silvium 51570
2Pages

Catalog excerpts

Product Data Hempel's Silvium 51570 Description: Hempel's Silvium 51570 is an oleoresinous general purpose aluminium paint with good heat resistance and good light reflection. For protection of hot pipelines, exhaust pipes, smoke stacks and other hot surfaces upto peak temperatures of 250°C/482°F and upto permanent temperatures of 200°C/392°F. As a finishing coat on steel and woodwork exterior and interior in mild to moderately corrosive environment where an aluminium surface or light reflection is desired. Service temperature: Maximum, dry exposure only: 200°C/392°F, (peak) 250°C/482°F Tested according to section 175.300 of the Code of Federal Regulations Title 21 - Dry Foodstuff. Consult Hempel for details. Tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain. Complies with EU Directive 2004/42/EC: subcategory i. Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Surface-dry: Through-dry: VOC content: Shelf life: 19000 / Aluminium Glossy see REMARKS overleaf 38 ± 2 15.2 m2/l [609.5 sq.ft./US gallon] - 25 micron/1 mils 38 °C [100.4 °F] 0.9 kg/litre [7.8 lbs/US gallon] 1 hour 20°C/68°F 3.5 hour(s) 20°C/68°F 505 g/l [4.2 lbs/US gallon] 5 years (25°C/77°F) from time of production. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Application method: Thinner (max.vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: Airless spray / Air spray / Brush Do not dilute. see REMARKS overleaf 0.017 " 100 bar [1450 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 25 micron [1 mils] 75 micron [3 mils] According to specification. According to specification. Date of issue: April 2020 Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulatio

Open the catalog to page 1

Product Data Hempel's Silvium 51570 SURFACE PREPARATION: New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Power tool cleaning to St 3 or abrasive blasting to Sa 2 (ISO 8501-1:2007). Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Remove all rust and loose material by abrasive blasting or power tool cleaning. Dust off residues. APPLICATION CONDITIONS: Apply only on a dry and clean...

Open the catalog to page 2