HEMPEL'S SEATECH SATIN VARNISH 09710
2Pages

{{requestButtons}}

Catalog excerpts

HEMPEL'S SEATECH SATIN VARNISH 09710 - 1

Product Data HEMPEL'S SEATECH SATIN VARNISH 09710 Description: HEMPEL'S SEATECH SATIN VARNISH 09710 is a fast drying, one component water-borne acrylic satin varnish with very high outdoor resistance. Contains UV filters. Recommended use: On a new as well as previously varnished wood, interior and exterior and above the waterline. Availability: Part of European Yacht assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: VOC content: - 00000/ Transparent. see REMARKS overleaf. silk gloss 32 ± 1 12 m2/l [481.2 sq.ft./US gallon] - 30 micron/1.2 mils None. 1 kg/litre [8.7 lbs/US gallon] 1 hour(s) at 20°C/68°F see REMARKS overleaf. 2-3 hour(s) at 10°C/50°F see REMARKS overleaf. 20 g/l [0.2 lbs/US gallon] The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Application method: Thinner (max.vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: Date of issue: January 2012 - Airless spray / Conventinoal spray / Brush/Roller Fresh water (3%) / Fresh water (5-10%) / Fresh water (3%) 0.13 - 0.17 " 130 bar [1885 psi] (Airless spray data are indicative and subject to adjustment) Fresh water (see REMARKS overleaf.) 30 micron [1.2 mils] see REMARKS overleaf. 90 micron [3.6 mils] According to specification. According to specification. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Page: 1/2 Product Data Sheet

Open the catalog to page 1
HEMPEL'S SEATECH SATIN VARNISH 09710 - 2

HEMPEL'S SEATECH SATIN VARNISH 09710 SURFACE PREPARATION: New wood: Sanding (remove dust). Saturate the dry, clean surface with suitable wood preservative, allow to dry. Apply one coat of the product thinned with: 20% Fresh water. Apply a second coat of the product thinned: 5-10%. Sanding (remove dust). Finally apply 3-5 coats of the product. Add thinner to assist application if necessary. To obtain a smooth surface, sanding between coats is recommended (remove dust). Dry to sand after: 8-10 hours at 20°C/68°F. Previously painted surfaces: Bad adherence or old alkyd products: Old paint:...

Open the catalog to page 2

All Hempel catalogs and brochures

  1. Hempasil X3+

    2 Pages

Archived catalogs