Catalogs >
Hempel >
HEMPEL'S DIAMOND VARNISH 05140

HEMPEL'S DIAMOND VARNISH 05140
2Pages

Catalog excerpts

05140: BASE 05149: CURING AGENT 95370 Description: HEMPEL'S DIAMOND VARNISH 05140 is a clear non-yellowing two-component polyurethane varnish. It gives a hard, durable, glossy long-lasting finish. Good resistance to weathering, abrasion and chemicals. Recommended use: For use on new wood as well as on previously varnished wood, interior and exterior, above the waterline. Not recommended for carvel or clinker built wooden hulls. Availability: PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Dry to sand: Fully cured: VOC content: Shelf life: APPLICATION DETAILS: Version, mixed product: Mixing ratio: Part of European Yacht assortment. Local availability subject to confirmation. 00000/ Transparent High-gloss 50 ± 1 12.5 m2/l [501.2 sq.ft./US gallon] - 40 micron/1.6 mils 32 °C [89.6 °F] 1 kg/litre [8.7 lbs/US gallon] 8 hour(s) 20°C/68°F 16 hour(s) 10°C/50°F 24 hour(s) 20°C/68°F 48 hour(s) 10°C/50°F 7 day(s) 20°C/68°F 14 day(s) 10°C/50°F 448 g/l [3.7 lbs/US gallon] 3 years 25°C/77°F The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. Application method: Thinner (max.vol.): Pot life: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: 05140 BASE 05149: CURING AGENT 95370 2 : 1 by volume. Stir the Base, add Curing Agent and mix well. Allow mixed paint to rest for several minutes before use to allow air bubbles to escape. Air spray (HVLP) / Conventional (Gravity feed) / Conventional (Suction feed) / Conventional (Pressure feed) (15-30%)/ Brush ( max20%) Fluid tip: 1.2-1.5 mm/ 1.4-1.6 mm/ 1.6-1.8 mm/1.0-1.2 mm Air pressure: 0.7 bar / 3-4 bar/ 3-4 bar/ 4-6 bar HEMPEL'S THINNER 871 (No 2) 08711 (Brush/Roller): max. 20%. HEMPEL'S THINNER 851 (No 6) 08511 ( Spray): 15-30% 5 hour(s) 20°C/68°F 10 hour(s) 10°C/50°F HEMPEL'S THINNER 871 (No 2) 08711 or HEMPEL'S THINNER 851 (No 6) 08511 40 micron [1.6 mils] 90 micron [3.6 mils] 16 hour(s) 20°C/68°F 32 hour(s) 10°C/50°F 5 day(s) 20°C/68°F 10 day(s) 10°C/50°F Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Date of issue: August 2016

Open the catalog to page 1

Product Data HEMPEL'S DIAMOND VARNISH 05140 SURFACE PREPARATION: Preparation: Always ensure all surfaces are clean, oil free and dry. Clean the surface and remove possible oil and grease with a suitable detergent and sand with dry abrasive paper. Carefully remove dust with fresh water. New wood: Sand and remove all dust. Saturate the dry, clean surface with suitable wood treatment, allow to dry. Plywood: Sand and remove all dust. Seal the dry clean surface with suitable wood sealer. Previously damaged varnished wood: Wood treatment may be necessary. Previously varnished wood: Abrade, clean...

Open the catalog to page 2