Product Data HEMPEL'S ANTIFOULING OLYMPIC FB 8695B Description: HEMPEL’S ANTIFOULING OLYMPIC FB 8695B is a tin-free, self-polishing antifouling. Polishing is based on an ion exchange, resulting in a hydrolysable activated layer. An inorganic fibre content ensures polishing control and mechanical strength. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26). As an economical antifouling for flat bottom on vessels operating at medium to high speed and high activity with short idle periods, and with dry-docking interval of up to 36 months. Aluminium hulls: see REMARKS overleaf. Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: VOC content: 51110 / Red see REMARKS overleaf Flat 50 ± 1 5 m2/l [200.5 sq.ft./US gallon] - 100 micron/4 mils 28 °C [82.4 °F] 1.5 kg/litre [12.6 lbs/US gallon] 4 - 5 hour(s) 20°C/68°F 454 g/l [3.8 lbs/US gallon] The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Application method: Thinner (max.vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: Airless spray / Brush/Roller see REMARKS overleaf 08080 (5%) / 08080 (5%) 0.027 - 0.031 " 270 bar [3915 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 100 micron [4 mils] see REMARKS overleaf 200 micron [8 mils] According to specification. According to specification. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Product Data Sheet

HEMPEL'S ANTIFOULING OLYMPIC FB 8695B SURFACE PREPARATION: Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitable detergent, followed by high pressure fresh water cleaning for a thorough removal of any possible weak structure of leached antifouling. APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying. PRECEDING COAT: According to specification. Recommended systems are: HEMPADUR 45182, HEMPATEX HI-BUILD...