Product Data HEMPASIL X3+ 87500 fouling release coating 87500 : BASE 87509 : CROSSLINKER 98951 Description: HEMPASIL X3+ is a third generation fouling release coating based on silicone hydrogel. HEMPASIL X3+ is biocide free, two-component and has a high solids content. HEMPASIL X3+ provides a smooth, low surface energy and repellent surface with unique fouling release properties. A hydrogel micro layer prevents fouling organisms from firmly adhering and provides self-cleaning properties. Therefore, HEMPASIL X3+ possesses a high fuel saving potential compared to traditional antifoulings. During extended idle periods the coating may accumulate some fouling. HEMPASIL X3 does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO, October 2001 (IMO document AFS/CONF/26). For vessels with service speeds above 8 knots. The product can also be used for propellers. Also ideal for use in power plant water inlets on pipes and grates to prevent biofouling. Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured: VOC content: Shelf life: 59151* / Red Glossy 71 ± 1 4.7 m2/l [188.5 sq.ft./US gallon] - 150 micron/6 mils 28 °C [82.4 °F] 1 kg/litre [8.3 lbs/US gallon] 3 approx. hour(s) 20°C/68°F 7 day(s) 20°C/68°F 260 g/l [2.2 lbs/US gallon] 2 year (25°C/77°F) for BASE and 1 year for CROSSLINKER (25°C/77°F) from time of production. Depending on storage conditions, mechanical stirring may be necessary before usage. *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version, mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: 87500 BASE 87509 : CROSSLINKER 98951 17.8 : 2.2 by volume Airless spray / Brush (touch up) see REMARKS overleaf No thinning see REMARKS overleaf 2 hour(s) 20°C/68°F 0.019 - 0.021 " 150 bar [2175 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 150 micron [6 mils] 225 micron [9 mils] According to specification. According to specification. Date of issue: June 2016 Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.

Product Data HEMPASIL X3+ 87500 APPLICATION CONDITIONS: Use only where application and curing can proceed at temperatures above: 0°C/32°F. The temperature of the surface and that of the paint itself must also be above this limit. Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying. Curing requires a relative humidity of: minimum 30%, maximum 85%. The special application properties furthermore necessitate extra consideration as to possible windy weather. The on-site representative...