Product Data HEMPASIL NEXUS 27302 FOULING RELEASE TIECOAT 27302 : BASE 27309 : CURING AGENT 98100 : ADDITIVE 99701 Description: HEMPASIL NEXUS 27302 is a high solid three component silicone based product. Recommended use: As a tiecoat for the HEMPASIL FOULING RELEASE System, securing adhesion between the anticorrosive system and the Hempasil Fouling Release topcoat. Availability: Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured: VOC content: Shelf Life: 55001 Light red Semi-gloss 70 ± 1 see REMARKS overleaf 5.8 [236.3 sq.ft./US gallon] 30 °C [86 °F] 1.3 kg/litre [10.9 lbs/US gallon] 2 hour(s) 20°C/68°F 7 day(s) 20°C/68°F 279 g/l [2.3 lbs/US gallon] 1 Year (20°C/68°F) from time of production. Shelf life is reduced at storage temperatures above 20°C/68°F. - The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version; mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: 27302 BASE 27309 : CURING AGENT 98100 : ADDITIVE 99701 14.8 : 4.2 : 1 By volume Airless spray / Brush see REMARKS overleaf No thinning see REMARKS overleaf 1 hour(s) 20°C/68°F 0.019 - 0.021 " 150 [2175 psi] HEMPEL'S THINNER 08080 see REMARKS overleaf 120 micron [4.8 mill] 175 micron [7 mill] According to specification. According to specification. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Date of issue: December 2011 - Page: 1/2 Product Data Sheet

HEMPASIL NEXUS 27302 SURFACE PREPARATION: According to specification. Maintenance, old F/R systems: Possible spot repair with specified HEMPADUR system followed by spot application of the product. In any of the above-mentioned cases, a detailed working specification is available upon request. APPLICATION CONDITIONS: Use only where application and curing can proceed at temperatures above: 10°C/50°F Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying. PRECEDING COAT According...