Product Data HEMPADUR QUATTRO 17634 17634 : BASE 17636 : CURING AGENT 97334 Description: HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils. Recommended use: As a universal epoxy and self-primed high performance coating system for atmospheric or in-water service, including water ballast tanks to be coated according to IMO-PSPC requirements (Resolution MSC.215(82)). HEMPADUR QUATTRO 17634 is intended for all year application down to -10°C/15°F and for in-shop applications where fast recoating and handling is required. Features: Excellent anticorrosive and very good mechanical properties. Short drying time. Curing down to -10°C/14°F. Service temperature: Maximum, dry exposure only: 120°C/248°F Ballast water service. Resists normal ambient temperatures at sea (Avoid long-term exposure to negative temperature gradients). In water (no temperature gradient): 40°C/105°F Other liquids. Contact HEMPEL Certificates/Approvals: PSPC type approved. (Consult HEMPEL for specific Type Approval Certificates) Complies with Section 175.300 of U.S. Federal Regulations in respect of carriage of dry foodstuffs (FDA) in spaces with an internal surface area larger than 1000 m 2/10.750 sq.ft. Tested for non-contamination of grain cargo at the Newcastle Occupational Health, Great Britain. Complies with EU Directive 2004/42/EC: subcategory j. Availability: Part of Group Assortment. Local availability subject to confirmation. HEMPADUR QUATTRO 17634 replaces HEMPADUR 17630/17633 and HEMPADUR 45141/45143. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured: VOC content: - 50630* / Red. Semi-flat 72 ± 1 5.8 [236.3 sq.ft./US gallon] 125 micron 27 °C [80.6 °F] 1.4 kg/litre [11.5 lbs/US gallon] 4 approx. hour(s) 20°C/68°F 9 (approx.) hours 5°C/41°F 7 day(s) 20°C/68°F. 20 days 5°C/41°F 276 g/l [2.3 lbs/US gallon] *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version; mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life (Airless spray): Pot life (Brush): Induction time: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: 17634 BASE 17636 : CURING AGENT 97334 4 : 1 By volume Airless spray / Brush 08450 (5%) / 08450 (5%) 2 hour(s) 20°C/68°F 2 hour(s) 20°C/68°F see REMARKS overleaf 0.021 - 0.025 " 250 [3625 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S TOOL CLEANER 99610 125 micron [5 mill] 175 micron [7 mill] According to separate APPLICATION INSTRUCTIONS According to separate APPLICATION INSTRUCTIONS Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Date of issue: December 2011 - Page: 1/2 Product Data Sheet

HEMPADUR QUATTRO 17634 SURFACE PREPARATION: New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to minimum Sa 2½ (ISO 85011:1988) with a surface profile corresponding to Rugotest No. 3, N9a to N10, preferably BN9a to BN10, Keane-Tator Comparator, 2.0 G/S or ISO Comparator, Medium (G). Apply immediately after cleaning. All damage of shopprimer and contamination from storage and fabrication should be thoroughly cleaned prior to overcoating. For repair and touch-up use: the product....