HEMPADUR QUATTRO 17634
3Pages

Product Data HEMPADUR QUATTRO 17634 17634: BASE 17636: CURING AGENT 97334 Description: HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils. As a universal epoxy and self-primed high performance coating system for atmospheric or in-water service, including water ballast tanks and cargo oil tanks to be coated according to IMO-PSPC requirements (Resolutions MSC.215(82) and MSC.288(87)). Also recommended for long time corrosion protection of structural steel and concrete in severe corrosive and immersed environments. HEMPADUR QUATTRO 17634 is intended for all year application down to -10°C/15°F and for in-shop applications where fast recoating and handling is required. Excellent anticorrosive and very good mechanical properties. Short drying time. Curing down to -10°C/14°F. Service temperature: Maximum, dry exposure only: 120°C/248°F Ballast water service. Resists normal ambient temperatures at sea (Avoid long-term exposure to negative temperature gradients). Other liquids: Contact HEMPEL PSPC type approved. (Consult HEMPEL for specific Type Approval Certificates) Tested according to section 175.300 of the Code of Federal Regulations Title 21 - Dry Foodstuff. Consult Hempel for details. Tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain. Approved as a low flame spread material when used as part of a predefined paint system. Please refer to “Declaration of Conformity” on www.Hempel.com for further details. Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Surface-dry: Through-dry: Fully cured: VOC content: Shelf life: 50630*/ Red Semi-flat 72 ± 2 5.8 m2/l [232.6 sq.ft./US gallon] - 125 micron/5 mils 27 °C [80.6 °F] 1.4 kg/litre [11.6 lbs/US gallon] 2 hour(s) 20°C/68°F 5 hour(s) 20°C/68°F 7 day(s) 20°C/68°F 20 day(s) 5°C/41°F 276 g/l [2.3 lbs/US gallon] 3 years for BASE and 1 year (25°C/77°F) for CURING AGENT from time of production. *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version, mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life (Airless spray): Pot life (Brush): Induction time: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: 17634 BASE 17636: CURING AGENT 97334 4:1 by volume Airless spray / Brush / Roller 08450 (5%) / 08450 (5%) / 08450 (5%) 2 hour(s) 20°C/68°F 2 hour(s) 20°C/68°F - see REMARKS overleaf 0.021 - 0.025 " 250 bar [3625 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S TOOL CLEANER 99610 125 micron [5 mils] 175 micron [7 mils] see REMARKS overleaf see REMARKS overleaf Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.

Product Data HEMPADUR QUATTRO 17634 SURFACE PREPARATION: New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to minimum Sa 2½ (ISO 8501-1: 2007) with a surface profile corresponding to Rugotest No. 3, N9a to N10, preferably BN9a to BN10, Keane-Tator Comparator, 2.0 G/S or ISO Comparator, Medium (G). Apply immediately after cleaning. All damage of shopprimer and contamination from storage and fabrication should be thoroughly cleaned prior to overcoating. For repair and touch-up...

Product Data HEMPADUR QUATTRO 17634 This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see “Explanatory Notes” available on www.hempel.com. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical...