Product Data HEMPADUR 35560 35560 : Base 35569 : curing agent 98560 Description: HEMPADUR 35560 is a solvent-free, two-component, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water. Recommended use: As a lining in potable water tanks and pipelines. Features: Excellent anticorrosive properties. Solvent free. Benzyl alcohol free. Service temperature: Maximum, dry exposure only: 140°C/284°F In fresh water (directly on steel): 45°C/113°F. (no temperature gradient) Certificates/Approvals: Approved by WRAS for potable water up to 35°C/95°F. Certified to NSF standard 61 by NSF international for use in potable water tanks with volumes of 100 gallon/380 litres or greater, pipes at 8 inches (20 cm) or greater Approved by Folkehelseinstituttet, Norway, for use in tanks for potable water offshore. Availability: Part of Group Assortment. Local availability subject to confirmation. PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured: VOC content: Shelf life: - 50900 / Red (see REMARKS overleaf.) Semi-gloss 100 5 m2/l [200.5 sq.ft./US gallon] - 200 micron/8 mils 100 °C [212 °F] 1.3 kg/litre [11.2 lbs/US gallon] 10 approx. hour(s) 20°C/68°F 12 day(s) 20°C/68°F 155 g/l [1.3 lbs/US gallon] 3 Year (20°C/68°F) from time of production. Shelf life is reduced at storage temperatures above 20°C/68°F. 1 year (25°C/77°F) for curing agent 98560. *other shades according to assortment list. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version, mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: Date of issue: March 2012 - 35560 Base 35569 : curing agent 98560 6.8 : 2.2 by volume Airless spray / Brush Do not dilute. 1.5 hour(s) 20°C/68°F 45 minutes (35°C/95°F) 0.021 " 220 bar [3190 psi] minimum. (Airless spray data are indicative and subject to adjustment) HEMPEL'S TOOL CLEANER 99610 200 micron [8 mils] 200 micron [8 mils] According to separate APPLICATION INSTRUCTIONS According to separate APPLICATION INSTRUCTIONS Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Page: 1/2 Product Data Sheet

HEMPADUR 35560 SURFACE PREPARATION: New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to near white metal Sa 2½ (ISO 8501-1:1988) with a surface profile corresponding to Rugotest No. 3, BN10a, Keane-Tator Comparator 3.0 G/S, or ISO Comparator Rough Medium (G). Apply immediately after cleaning. All damage of shopprimer and contamination from storage and fabrication should be thoroughly cleaned prior to overcoating. Repair and maintenance: Remove oil and grease etc. thoroughly with...