Catalogs >
Hempel >
Dynamic 9000 79900

Dynamic 9000 79900
2Pages

Catalog excerpts

Description: Recommended use: Certificates/Approvals: Availability: PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: VOC content: Shelf life: HEMPEL'S ANTIFOULING DYNAMIC 9000 is a premium high solids chemically hydrolysing SPC antifouling based on Silyl Acrylate Technology. Dynamic 9000 offers low friction properties, self-smoothening, and very fine control of polishing for optimal performance. Dynamic 9000 ensures leading premium performance in different trading speeds and outperforms other SPCs especially faster trading. The patented microfibers give Dynamic 9000 a best-in-class mechanical strength to avoid cracking and peeling. This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO documents AFS/CONF/26). For both newbuildings and maintenance of underwater hull and boottop for up to 90 months drydocking interval. Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 2015/830 - Europe Part of Group Assortment. Local availability subject to confirmation. 51110/ Red Flat 58 ± 1 5.8 m2/l [232.6 sq.ft./US gallon] - 100 micron/4 mils 24 °C [75.2 °F] 1.9 kg/litre [15.7 lbs/US gallon] 4 - 5 hour(s), 20°C/68°F 360 g/l [3 lbs/US gallon] 12 months (25°C/77°F) from time of production. Depending on storage conditions, mechanical stirring may be necessary before usage. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Application method: Thinner (max.vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: Airless spray / Brush / Roller see REMARKS overleaf 08080 (5%) / 08080 (5%) 0.027 - 0.031 " 270 bar [3915 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S THINNER 08080 100 micron [4 mils] see REMARKS overleaf 175 micron [7 mils] According to specification. According to specification. Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Date of issue: December 2016

Open the catalog to page 1

Product Data Hempel's Antifouling Dynamic 9000 79900 SURFACE PREPARATION: According to specification. Existing old self-polishing or ablative antifouling: Remove possible oil and grease etc. with suitable detergent, followed by high pressure fresh water cleaning for a thorough removal of any possible weak structure of leached antifouling. Sealer: Whether to use a sealer coat/tiecoat or not depends on the type and condition of the existing antifouling. APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined...

Open the catalog to page 2