Professional Heading and Positioning GNSS Compass • IMO type approved as a Transmit Heading Device (THD) • Accurate heading up to 3 minutes during GNSS outages • Enhanced heading performance with GLONASS • COAST™ technology maintains differentially- corrected positioning for 40 minutes or more after loss of differential signal • Flexibility for easy integration into NMEA 0183 and 2000 interfaces • Additional satellite tracking ensures a robust solution • Integrated gyro and tilt sensors deliver fast start-up times and provide heading updates during temporary loss of satellites • Maintains heading and position lock in obstructed areas Now with GLONASS, the IMO Wheelmarked Vector™ V103™ and V113™ GNSS compass series is known for its superb heading and positioning performance. With the addition of GLONASS, the V103 and V113 now provides a more robust solution in critical areas where sky blockage occurs. The rugged IP69K design housing is sealed for the harshest environments. It incorporates fixed and pole mounting capability for both marine and land applications. The Vector V103 and V113 series is suitable for both dynamic positioning and professional marine surveys, as well as for machine control applications in agriculture, mining, construction, and other challenging applications. The V103 and V113 utilize all of the recent innovations in Hemisphere’s Crescent® Vector GNSS technology. New Cross-Dipole low-multipath antennas are separated by 50 cm between phase centers, resulting in better than 0.3° heading performance while delivering position accuracy of better than 30 cm when using SBAS or Beacon corrections. The Vector V103 and V113 support both NMEA 0183 and NMEA 2000 interfacing, enabling a seamless choice of communication protocols with Hemisphere GNSS’ messaging. Crescent Vector technology delivers accurate and continuous performance, including position, heading, heave, pitch, and roll. The stability and maintenance-free design of the Vector V103 and V113 series replaces traditional gyrocompasses and stand-alone GPS at a fraction of the cost. [email protected] www.hemispheregnss.com

Vector V103 and V113 GNSS Sensor Specifications Receiver Type: Vector GNSS L1 Compass Signals Received: GPS and GLONASS Channels: 540 GPS Sensitivity: -142 dBm SBAS Tracking: 2-channel, parallel tracking Update Rate: 20 Hz standard Input Voltage: Power Consumption: Current Consumption: Power Isolation: Reverse Polarity Protection: Positioning Accuracy RMS: Horizontal Vertical Single Point 1: 1.2 m 2.5 m SBAS (WAAS) 2: 0.3 m 0.6 m Code Differential GPS 1: 0.3 m 0.6 m Heading Accuracy: 0.30˚ Pitch/Roll Accuracy: 1˚ Heave Accuracy: 30 cm 3 Timing (1PPS) Accuracy: 20 ns Rate of Turn: 90˚/s maximum...