HemisphereGNSS AtlasLink

Product catalog summary

Overview
AtlasLink is a multi-GNSS, multi-frequency smart antenna designed to receive corrections from Hemisphere's Atlas global corrections service. It offers flexibility by allowing users to receive Atlas corrections on any compatible receiver, freeing them from being tied to a single corrections provider.

Key Features

Supports Atlas L-band corrections and Athena RTK engine.
Features a powerful webUI accessible via Wi-Fi.
Includes internal memory for data logging, downloading, and uploading.
Designed with a robust enclosure for challenging environments.

Specifications
GNSS Receiver

Type: Dual-frequency, multi-GNSS RTK.
Signals: GPS, GLONASS, BeiDou.
Channels: 372.
Update Rate: 10 Hz standard, 20 Hz optional.
Positioning Accuracy: RTK 10 mm + 1 ppm, L-Band 0.08 m, SBAS 0.3 m.

L-Band Receiver

Type: Single Channel.
Channels: 1530 to 1560 MHz.
Sensitivity: -130 dBm.

Communications

Serial Ports: 2 full-duplex RS-232, CAN.
Protocols: NMEA 0183, NMEA 2000, Bluetooth 2.0, Wi-Fi.

Power

Input Voltage: 7-32 VDC.
Power Consumption: 4.5 W nominal.

Environmental

Operating Temperature: -40°C to +70°C.
Enclosure: IP67 rated.

Mechanical

Dimensions: 15.8 x 15.8 x 7.9 cm.
Weight: < 1.15 kg.

Conclusion
AtlasLink provides a versatile and powerful solution for GNSS corrections, supporting a wide range of applications and environments with its robust design and advanced features.

Catalog excerpts

AtlasLink™ GNSS Smart Antenna Expand Your World • Atlas® L-band corrections • Athena™ RTK engine • Powerful webUI accessed via Wi-Fi • Internal memory for data logging, download, and upload • Environment-proven enclosure for the most aggressive user scenarios AtlasLink is an all-new multi-GNSS, multi-frequency smart antenna preconfigured to receive corrections from Hemisphere’s Atlas global corrections service. AtlasLink paired with Atlas provides you with the easiest way to receive Atlas corrections via the industry’s most powerful multipurpose GNSS smart antenna, either directly from AtlasLink or into your existing receiver. No longer be tied to a single corrections provider requiring you to purchase their corrections, which can only be received by their device. Whether you utilize Atlas corrections data on equipment that doesn’t have the ability to receive L-band signals, or you would like to use Atlas corrections on systems that currently receive L-band corrections from another source, you now have the freedom to do so. AtlasLink, in SmartLink™ or BaseLink™ mode, enables you to utilize Atlas corrections on any receiver from any vendor that supports industry-standard correction formats. AtlasLink is supported by our easy-to-use Atlas Portal (www.atlasgnss.com), which empowers you to update firmware and enable functionality, including Atlas subscriptions for accuracies from meter to sub-decimeter levels. precision@h

Open the catalog to page 1

AtlasLink GNSS Smart Antenna GNSS Receiver Specifications Receiver Type: Signals Received: Channels: GPS Sensitivity: SBAS Tracking: Update Rate: Timing (1PPS) Accuracy: Cold Start: Warm Start: Hot Start: Maximum Speed: Maximum Altitude: Positioning Accuracy Horizontal Accuracy: RTK: 1,2 L-Band: 1,3 SBAS (WAAS): 1 Autonomous, no SA: 1 Dual-frequency, multi-GNSS RTK GPS, GLONASS, and BeiDou 372 -142 dBm 3-channel, parallel tracking 10 Hz standard, 20 Hz optional (with subscription) 20 ns < 60 s typical (no almanac, ephemeris, position, or RTC) < 30 s typical (almanac and RTC) < 10 s typical (almanac,...

Open the catalog to page 2