Unit heaters PROVIDED BY HEINEN & HOPMAN

Unit heaters The unit heaters are primary used to heat large spaces outside the accommodation like workshops, engine room, etc. The heating is done by hot-air supply through a heating coil. There are different types of heating units: Electrical heating unit: VLE heating units are mainly used in rough environments where boiler water is not available. The heating units are available from 3 kW to 36 kW. Explosion-proof electrical heating unit: FE2 heating units are ATEX certified unit heaters, specially developed for Ex II and EX IIB zone. The heating units are available from 2.5 kW to 23.1 kW. Hot-water...

The VLE electrical fan heaters are designed for rough environments e.g. on ships, offshore, in workshops and large production areas. The heaters are available in three standard types: VLE-4, VLE-5 and VLE-6. The heaters are available in galvanized steel, but can also be supplied in different materials (on customer request). The heaters have a built-in thermostat (0-40 °C) which ensures optimal operation and minimizes the energy consumption. The heaters have a thermal fuse that turns off the heater at 110 °C. Heating element The heaters have an electric tube heating element made of stainless steel...

FE2 unit heaters FE2 electrical fan heaters are CE-marked & ATEX-approved for use in hazardous areas. The heaters are designed for locations where specific explosive gases or dust may be present. The heaters use the Vacucore. The induced vacuum within the sealed core provides greater efficiency, distribution of heat across the face of the exchanger and a faster warm-up. If necessary, the entire core can be safely and easily replaced with a new exchanger or core. The heaters are ATEX Approved (directive 94/9/EC) and Ex II 2 G, Ex d IIB T3 Gb-certified. Heating element The heater core assembly...

Alternatives available on request. Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

Hot-water unit heaters Hot-water unit heaters are primarily designed for heating of large rooms, workshops or production areas. The TGA 2000 heaters are designed for onshore and offshore objects. The heaters are manufactured in different sizes, with a heating capacity from 8.1 kW to 100 kW and an air flow from 1430 m3/h to 9370 m3/h. Heating element The heaters use the boiler water as heating medium. The air will flow through the heating coil by using a axial or centrifugal fan. The heaters are available with copper tube and aluminum fins, but can also be supplied with stainless-steel casing...

uAE (Dubai) T: +971 4263 5453 E: [email protected] usA - Fort Lauderdale, Florida T: +195 4463 0110 E: [email protected] usA - Houma, Louisiana T: +198 5876 7989 E: [email protected] Heinen & Hopman encourages a more sustainable world. By providing eco-friendly solutions and services we offer our clients the option of reducing energy consumption and thus co2 emissions. Visit greenmanifest.info for more information. HEINEN & HOPMAN