video corpo

4V222C

4V222C

4V222C

Product catalog summary
Engine Specifications
The engine model 4V222C (DX22) is a 12-cylinder V-type engine with a bore and stroke of 128 x 142 mm and a displacement of 21.9 liters. It has a compression ratio of 17.0:1 and a firing order of 1-12-5-8-3-10-6-7-2-11-4-9. The engine rotates counterclockwise when viewed from the flywheel.

Fuel and Starting System
The engine uses a common rail fuel system controlled by an ECU and is started electrically by a 24V, 7.0A starter motor. It includes a 24V, 80Ah alternator and a 24V, 200Ah battery.

Aspiration and Cooling
The engine features a wet turbocharger and intercooler. The cooling system includes a heat exchanger or keel cooling with a maximum water capacity of 105 liters and a minimum of 94.5 liters. The fresh water pump is centrifugal, and the sea water pump uses a rubber impeller.

After Treatment and Lubrication
The engine complies with IMO Tier-III standards using an SCR system, while IMO Tier-II does not require after-treatment. The oil pan capacity ranges from 36 to 69 liters, with oil pressure at full load being 3.0 kg/cm² and idle at 1.0 kg/cm².

Dimensions and Weight
The engine measures 1914 x 1323 x 1346 mm and weighs 2020 kg.

Performance and Emission Standards
The engine operates under ISO 3046 standards with a performance tolerance of ±3%. It is available in various duty models: Continuous Duty, Heavy Duty, Medium Duty, and Light Duty, each with specific power ratings and emission compliance (IMO Tier II/III, EPA Tier 3, RCD).

Key Features and Benefits
The engine boasts an advanced fuel injection system, high-efficiency SCR, smoke reduction, increased component durability, and features like an auto tensioner, turning device, and electrical oil drain pump. It offers a 5% reduction in fuel consumption and extended oil and filter replacement cycles from 250 to 500 hours. A maximum 3-year warranty is available through an extended warranty option.

Contact Information
HD Construction Equipment Co., Ltd., 11F, HD Hyundai Group’s Global R&D Center, 477, Bundangsuseo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea(13553). Email: [email protected]. Website: www.hd-hyundaiengine.com.

Note: Specifications are subject to change without prior notice.
See more

Catalog excerpts

4V222C-1

Conditions Model rpm Emission

 Open the catalog to page 1
4V222C-2

tKey Features and Benefit HighPerformanc^^^^^^^® ■ Advanced fuel injection system with common rail ■ Compliance with emission regulation (IMO Tier II/III, EPA Tier 3) ■ Increased durability of key components ■ Electrical oil drain pump ■ CCV for engine room cleanliness ■ Maximum 3 years warranty provided through extended warranty option ■ Decreasing fuel consumption to average 5% by downsizing ■ Increased oil & filter replacement cycle (250hr -> 500hr) ■ CD(Continuous Duty) / HD(Heavy Duty) / MD(Medium Duty) / LD(Light Duty) L| r% CONSTRUCTION ttXJ EQUIPM

 Open the catalog to page 2

All HD Hyundai Infracore catalogs and brochures

  1. 4L126C

    2  Pages

  2. V222TI

    2  Pages

  3. 4V158C

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.