video corpo

4V158C

4V158C

4V158C

Product catalog summary
Engine Specifications
  • Model: 4V158C (DX15)
  • Cylinders and Arrangement: 8-cylinder, V type
  • Bore x Stroke: 128 x 147 mm
  • Displacement: 15.1 liters
  • Compression Ratio: 17.6:1
  • Firing Order: 1-5-7-2-6-3-4-8
  • Direction of Revolution: Counterclockwise from Flywheel
  • Fuel System: Common rail controlled by ECU
  • Starting System: Electric starting by starter motor (24V - 7.0A)
  • Alternator Capacity: 24V - 80Ah
  • Battery: 24V - 200Ah
  • Aspiration: Wet turbocharger & intercooler
  • Cooling System: Heat exchanger / Keel Cooling
  • Cooling Water Capacity: Max: 77 liters, Min: 72 liters
  • Fresh Water Pump Type: Centrifugal (Pulley type)
  • Sea Water Pump Type: Rubber Impeller
  • After Treatment System: SCR for IMO Tier-III
  • Lubricant Oil Pan Capacity: Max: 50 liters, Min: 25 liters
  • Oil Pressure: Full load: 3.5 kg/cm², Idle: 1.2 kg/cm²
  • Dimensions (L x W x H): 1564 x 1310 x 1380 mm
  • Dry Weight: 1555 kg
Power Rating
  • No reduction in rating for intake air temperature up to 45℃ and sea water temperature up to 32℃, with relative humidity up to 60%.
  • Performance tolerance of ±3% based on ISO 3046.
Engine Models and Power Output
  • Continuous Duty: 4V158CA(C) - 449 kW / 610 PS at 1800 rpm
  • Heavy Duty: 4V158CA(H) - 463 kW / 630 PS at 1800 rpm, 4V158CB(H) - 405 kW / 551 PS at 1800 rpm
  • Medium Duty: 4V158CA(M) - 550 kW / 748 PS at 2100 rpm, 4V158CC(M) - 478 kW / 650 PS at 2100 rpm
  • Light Duty: 4V158CA(L) - 640 kW / 870 PS at 2300 rpm
Key Features and Benefits
  • Advanced fuel injection system with common rail
  • Compliance with emission regulations (IMO Tier II/III, EPA Tier 3)
  • High-efficiency SCR and smoke reduction
  • Increased durability of key components
  • Auto tensioner and turning device
  • Electrical oil drain pump and CCV for engine room cleanliness
  • Decreased fuel consumption by an average of 5% through downsizing
  • Extended oil & filter replacement cycle (250hr to 500hr)
  • Maximum 3 years warranty with extended warranty option
Contact Information

HD Hyundai Infracore Co., Ltd.
14F, HD Hyundai Group’s Global R&D Center, 477, Bundangsuseo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea(13553)
Tel: +82-32-211-1114
Email: [email protected]
Website: www.hd-hyundaiengine.com

See more

Catalog excerpts

4V158C-2

Marine Propulsion Engine Key Features and Benefit High Performance  Advanced fuel injection system with common rail  Compliance with emission regulation (IMO Tier II/III, EPA Tier 3)  High-efficiency SCR  Smoke reduction  Increased durability of key components Economical  Decreasing fuel consumption to average 5% by downsizing  Increased oil & filter replacement cycle (250hr  500hr) Auto tensioner Turning device Electrical oil drain pump CCV for engine room cleanliness Warranty  Maximum 3 years warranty provided through extended warranty option Performance Curve · CD(Continuous Duty)...

 Open the catalog to page 2

All HD Hyundai Infracore catalogs and brochures

  1. 4L126C

    2  Pages

  2. V222TI

    2  Pages

  3. 4V222C

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.