SeaPass Passenger Suit Reference# 82940-01290STD SeaPass Passenger Suit Our most lightweight survival suit. SeaPass is an uninsulated IMO SOLAS immersion suit approved for 1 hour thermal protection in watertemperature below 5° Celsius. Ideal for installation onboard passenger vessels or as an additional insurance onboard in leisure craft. The suit must be used in combination with a certified lifejacket. SeaPass can be vacuum packed and takes minimal space on board. When vacuum packed by Hansen Protection, we recommend extended service interval to 10 years. The suit can be used with the wearer's own shoes either on the outside or inside the suit. • Emergency suit on board passenger vessels and recreational vessels • PU coated Nylon • Requires use of additional approved lifejacket • Integrated insulated hood in neoprene • Front zipper with waterproof gusset underneath • Attached 5-finger gloves • Adjustable ankle straps • Allows for use of shoes both inside as well as on the outside • Approved reflective tape • Approved in accordance with SOLAS' LSA Code MED/1.5a as an uninsulated immersion suit, designed to be used with lifejacket. • 1 hour thermal protection in water temperature less than 5 degrees Celsius • The suit with compatible lifejacket is approved as substitute to thermal lifejackets according to Norwegian Maritime Directorate's (NMD's) regulations • Tested to NMD's requirements in "Guidelines for passenger suits for Norwegian passenger vessels" • Vacuum packing for extended service interval to 10 years • 1 hour thermal protection • Extremely light weight and easy to store • Eliminates cold shock • Polar Code

Product Detail Area of application Passenger vessel PU-coated nylon Main zipper type Soft non-waterproof zipper, with wide gusset underneath for sealing Reflective material Integral, in suit material Boots / socks Socks Socks with room for the wearer's own shoes (can be used on the outside) Thermal protection without lining/inherent 1 hour (IMO/Solas less than 5°C watertemp) insulation Service interval (standard) Service Interval (in HP-vakuum) 10 year - manufacturer's recommendation Service interval (HP-vacuum) Note: Some flag states may have specific regulations with regards to service Certifications...