tank cleaning system for ships (high pressure nozzle type, mobile type) L Series
1 / 2Pages

High pressure cleaning of tanks Aquamat® Automatic tank cleaners The nozzle arms rotate due to the reaction force of the water jets emitting from the nozzles mounted at each end. Hammelmann automatic tank cleaners remove deposits including hardened materials from tank internal walls at pressures of up to 1500 bar. This rotational motion is transferred via a built in drive and reduction gear which in turn rotates the cleaner around its vertical axis. By rotating in two axes the water jets can reach all parts of the tank interior. The units operate using the power of high pressure water so no other energy sources or extra cleaning materials are necessary. Speed of rotation is controlled by an adjustable induction brake magnet. The wide range of Hammelmann nozzle arms with various lengths and shapes enable the Aquamat® cleaners to be used für many applications. Units can be fitted with one or two arms. Special design features of the Aquamat® tank cleaner are: • Optimum water flow characteristics Strong cutting action Highly coherent jet Long jet throw • Smooth, non wearing braking system Applications: • Internal cleaning of autoclaves, vessels, Euro containers, reactors, agitator vessels, holding tanks drying towers etc. • Compact, corrosion resistant housing Freely suspended operation possible High reliability thanks to simple component parts • Decontamination • Disinfection (with chemical addatives) • Cleaning the interior of large diameter pipework with deployment sledge Section of a single arm Aquamat® jetting pattern after 260 revolutions of the arm. © Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Subject to modification Hammelmann Maschinenfabrik GmbH Postfach 3309 • D-59282 Oelde Telefon (0 25 22) 76-0 Zum Sundern 13-21 • Germany Telefax (0 25 22) 76-444 eMail: mail@hammelmann.de • Internet: www.hammelmann.de

Aquamat® Automatic tank cleaners Both the “L” and “XL” units can be outfitted with impact protection and the XL is also available with a protective cage. Sledge assemblies will convert the “L” and “XL” to pipe cleaning units incorporating a unique “kick plate” which utilises the force of the water jet to push the unit forwards through the pipe. Here are some examples from our wide range: Type L 1200-2 18 mm S-arm, 2 nozzles max. 1200 bar / 200 l/min. Min. Tank access: 140 mm Type L 1800 18 mm S-arm, 2 nozzles max. 1800 bar / 200 l/min. Min. Tank access: 135 mm Type L 1200-2 with sledge for...