HAM MAR BETTER SOLUTIONS FOR SAFETY AT SEA PRODUCT INFORMATION USERS • SALES • LIFEJACKET (PFD) SERVICE Product Information • Recharge instruction Why you should choose this model

2005 - 08 the hammar lifejacket inflator product information 1. Some big-benefit features of the Hammar Manual/Automatic Lifejacket Inflator • Unique hydrostatic valve that protects the water sensitive element. No activation in rain, spray, splash and humidity (1). 2. Single point indicator Water inlet valve • Single point indicator (green) shows that the inflator is ready for use (2). • Cylinder seal indicator (green) ensures that the cylinder has not been used (2) • Gas cylinder located inside the lifejacket bladder. Cylinder protected against corrosion. Reduces snagging hazard (3). 3. • No...

HAMMAR LIFEJACKET INFLATOR REARMING INSTRUCTIONS smooth, flat surface and wipe off any water. Hold the gas cylinder through the fabric, using one hand. (PFD = Personal Floating Device) Insert metal key as shown in 2a and between black locking ring and labelled yellow cap. The black locking ring will now turn counter-clockwise Now turn black locking ring counter- (cap = yellow inflator operating head) Squeeze sealing ring to elongate and remove the inflator body through the sealing ring.

Dispose of used inflator body in an environmentally approved manner. Check that the indicator is green. Insert new inflator body with gas cylinder pointing upward inside the life- jacket (PFD). Let the sealing ring rest on the adapter around the four lugs. 1. Single point indicator showing answer to both these questions, then proceed as follows. If NO get Hold the gas cylinder through the fabric of the life jacket (8a). Position the replacement cap with the water inlet valve pointing to the right (8b) and press it FIRMLY onto the inflator body and sealing ring. While pressing FIRMLY onto the...

HAMMAR LIFEJACKET INFLATOR THIS MODEL OF INFLATOR! The Hammar Manual/Automatic Inflator has a unique hydrostatic valve that works by the pressure diffe- rence between the inside of the bladder and the outside. When the inflator is lowered more than about app. 10 cm in water, the hydrostatic valve opens and water will have access to a water sensitive element. That in turn releases a stainless steel coil spring. The spring then drives a needle into the end of the gas cylinder, which is now punctured so that the gas instantly fills the life jacket. WILL THE LIFEJACKET INFLATE IF NO - because it...