TECHNICAL DATASHEET SHEET PRODUCT DATA H20 HYDROSTATIC RELEASE FOR RAFT LIFEJACKET INFLATOR MA1 UNITS (IA-06XX) HSCODE CODE84798997, 84798997,Country CountryofofOrigin OriginSWEDEN SWEDEN HS DESCRIPTION DESCRIPTION ator sinks, Cap is the oneincreasing of two parts in HAMMAR’s inflation the system for inflH20 atable IfThe the infl vessel water pressure activates Hammar lifejackets MA1. The cap is the front part of the system where the energy and the spring loaded knife is set free. It automatically releases the liferaftand or mechanism activating whenit submerged to water. other life-saving appliances is connectedinto. TheHammar cap, when activated transfer force to thethe body withStrong cylinder thatorextract The H20 is designed to cut through White Rope bolt CO2 gas into the lifejacket bladder. The increased volume of the bladder increases the buoyancy but may, in some applications, also cut the unshielded electrical cable. of a person in water, preventing a person in water from drowning. The cap prevents inadvertent activation as it requires both presence of water and pressure to activate. LABEL AND PRODUCT MARKING Manual activation by pull tab. The inflator cap is marked as follows: 1703-30315-60/2 1703: Date of manufacturing (Year, Month) 30315-60: Batch number /2: Issue number Automatically activates when submerged in water, and with a pressure difference of about 10 centimeters. SERVICE LIFE To be replaced after the five-year expiry date marked on the top label or when the single point indicator is red. Material: UV-resistant and peel-proof material. Storage shall be conducted in a dry temperated space. Available with different lenghts The Hammar inflator is not affected by the pressure differences created in the air. • European Normalisation Standard for lifejackets – EN 396 etc - A1/MA1 EC • IMO/SOLAS (A 689/17) standard as detailed in M.S.A. (U.K.) test methods ”Vol 2” - A1/MA1 EC • Civil Aviation Authority Standard specifi cation number 5 Federal Aviation Authority - Standard TSO C13f - A1 PACKING SPECIFICATIONS To minimize shipping costs, these are packed in boxes containing 200 pcs. Outer box dimension: 37x30x37 cm Approximate gross weight of 200 pcs: 10 kg • ISO 12402 - MA1 EC The following tests exceeds the standard: • Time to total discharge of gas (ambient temperature) = 60 gms compressed CO2 - manual activation 2,5 seconds from time of pulling tab - automatic activation 3,5 seconds from time of immersion • 1F Humid atmosphere/automatic operability test 95,6 to 97,5% relative humidity at (120oF) Scan the QR code for applicable products CM Hammar AB August Barks ga

CM Hammar AB August Barks gata 15 SE-421 32 Vastra Frolunda