GC THERMO
1Pages

GC THERMO Technical data PROTECTION FRAMEWORK EN ISO 20345: 2011 – Safety footwear used for general purposes. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour. For professional use: Fishing - agriculture - industry - cleaning or other activities requiring this kind of protection. CATEGORY 2 PPE And complies with EU regulation 2016/425 PPE = Personal Protective Equipment ILLUSTRATION AND INSTRUCTIONS PERFORMANCE Hydrolysis resistance (hydrolysis = chemical breakdown due to reaction with water) Excellent thermal insulation while remaining supple at -20°C Sole resistant to acids and organic solvents, oils and grease S4 = Basic safety requirements + antistatic footwear + energy absorption in the heel region of at least 20 J + toe cap Heel lug on boots for easy kick-off SRA = Slip resistance on ceramic tile wetted with dilute soap solution Antistatic and non-slip sole with extra deep tread pattern Heel energy absorption PRINCIPAL MATERIALS Removable insole Easy to clean and disinfect Steel toe cap resisting an impact of over 200 J and compression of up to 15kN for loads (1.5 tonnes) Excellent protection on icy surfaces, withstanding temperatures as low as - 70°C For maximum protection, check the condition of your boots thoroughly before each use. DO NOT USE the boots if the protective parts (i.e. toe cap, sole) are damaged. INSTRUCTIONS • CARE - Clean the boots after every use with water and soap, using a soft brush - Rinse immediately - Allow to dry well • STORAGE - Store the boots in a well-ventilated place Colour : navy, orange, green The lifespan of the boots is linked to conditions of use and quality of care Route de Concarneau - 29910 Trégunc +33 (0)2 98 97 66 79 - info@guycotten.com Declaration of conformity on www.guycotten.com