WE91-1 HIGH TACK GLASS PREPREG ¬ WE91-1 high tack resin matrix High flow matrix Germanischer Lloyd Certified INTRODUCTION WE 91 is part of Gurit’s comprehensive offering of structural composite product solutions comprising of 3 main product groups; Prepreg, SPRINT® and SparPreg®. This unique product range provides technically and commercially competitive engineering materials, ideal for use either solely, or in conjunction with other Gurit products from within the range. Gurit’s WE91 prepreg product range comprises of two tack variants; WE911 high tack and WE91-2 medium tack prepregs. WE91 is a high flow epoxy prepreg ideally suited to structural composite component manufacture. It can be cured at temperatures as low as 85⁰C / 185⁰F, but can also be used for the rapid manufacture of components through its 45-minute cure at 120⁰C / 250⁰F. All of this can be achieved together with an out-life of 60 days at 21⁰C / 70⁰F. WE91-1 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.

PRODUCT INFORMATION WE91-1 prepreg can be used with both SPRINT ® and SparPreg™ products. It is supplied with a poly backer and can be applied to the substrate with either side against the tool. The product formats listed to the right also benefit from 3rd Party Certification. PRODUCT DESCRIPTION 600gsm ±45° E-Glass Biaxial Prepreg Germanischer Lloyd In order to maximise the potential of the prepreg product range please contact the Gurit Technical Support Department. Contact details are on the back of this Product Data Sheet. General prepreg / SPRINT ® working practices apply to these products,...

LAMINATE PROPERTIES All data presented in this datasheet is based on the mechanical testing of a single batch of material. CURED RESIN PROPERTIES 4mm resin cast oven cured using standard processing techniques and cured at 120°C (175°F) for 90 minutes. PROPERTY TEST STANDARD Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Compressive Strength CURED LAMINATE Cured using standard processing techniques and a minimum cure time of 90 minutes at 120°C (250°F). PROPERTY TEST STANDARD Fabric / Fibre Description 600g/m2 Stitched Biaxial using E-glass Resin Content Cure Method Cure Schedule...

NOTICE All advice, instruction or recommendation is given in good faith but the Company only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at the Company’s Website: www.gurit.com/terms-and-conditions.aspx. The Company strongly recommends that Customers make test panels and conduct appropriate testing of any goods or materials supplied by the Company to ensure that...