Catalog excerpts
Full General Datasheet SPABOND™ 730 RAPID STRUCTURAL ADHESIVE ¬ Fast clamp time, high strength, structural adhesive Gels in 10 minutes, solid in 2 hours, Good degree of cure after 6 hours at ambient Available in 400ml 2 component dual cartridges INTRODUCTION Spabond™ 730 is a fast curing structural adhesive designed for applications where reduced clamp times are important. It has a simple 1:1 by weight and volume mix ratio. It can be used to bond together a wide variety of dissimilar materials and has been designed to give a durable high strength bond. Spabond™ 730 is available in cartridges.
Open the catalog to page 1
PRODUCT INFORMATION AVAILABILITY The product is available in a number of formats please contact your local customer support or download the latest product catalogue available on www.gurit.com. TRANSPORT & STORAGE COMPONENT UNITS 10 – 25°C The resin and hardeners should be kept in securely closed containers during transport and storage. Any accidental spillage should be soaked up with sand, sawdust, cotton Spabond™ 730 Resin months 12 waste or any other absorbent material. The area should then be washed clean (see Spabond™ 730 Hardener months 12 appropriate Safety Data Sheet). Adequate long...
Open the catalog to page 2
SPABOND™ 730 This 1 page product summary is intended for use in conjunction with further advice provided under the Instructions for Use section. All data has been generated from typical production material and does not constitute a product specification. MIXING AND HANDLING PROPERTY MIXED SYSTEM Appearance - colour TEST METHOD Appearance - form Thixotropic paste COMPONENT & MIXED SYSTEM VISCOSITY UNITS Spabond™ 730 Resin Viscosity Spabond™ 730 Hardener Viscosity Initial Mixed System Viscosity Clamp Time** TEST METHOD ADHESIVE PERFORMANCE MECHANICAL PROPERTIES TEST STANDARD CURED MECHANICAL...
Open the catalog to page 3
NOTICE All advice, instruction or recommendation is given in good faith but the selling Gurit entity (the Company) only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at Gurit’s Website: www.gurit.com/terms-and-conditions.aspx The Company strongly recommends that Customers make test panels in the final process conditions and conduct appropriate testing of any...
Open the catalog to page 4All Gurit catalogs and brochures
-
GURIT® BALSAFLEX™4 Pages
-
CORECELL™ S3 Pages
-
CORECELL™ T3 Pages
-
GURIT® PVC3 Pages
-
CORECELL™ A3 Pages
-
SPABOND™ 3457 Pages
-
Formulated Products Brochure23 Pages
-
T-Prime 1608 Pages
-
T-Prime 130-1 (v5)8 Pages
-
SMARTCURE™ (v9)4 Pages
-
System SPRINT™ Resin (v2)4 Pages
-
T-Lam 130-1 Slow6 Pages
-
T-Gel 130-16 Pages
-
T-Paste 70-26 Pages
-
CR 34005 Pages
-
Gurit® Kerdyn® Green4 Pages
-
Marine Market Summary (v1)2 Pages
-
Hetairos_Gurit_Project2 Pages
-
Aerospace2 Pages
-
PB10004 Pages
-
HI-PANEL2 Pages
-
Gurit G-PET1 Pages
-
GURIT PRODUCT CATALOGUE 201688 Pages
-
Eposeal 3006 Pages
-
Ampreg 268 Pages
-
Ampreg 21FR6 Pages
-
ST 956 Pages
-
PREPREGS11 Pages
-
Hi-Panel Product Brochure2 Pages
-
CORE MATERIALS9 Pages
-
ADHESIVES5 Pages
-
WE91 - 24 Pages
-
WE91 - 14 Pages
-
SE 85 GT5 Pages
-
SE 855 Pages
-
SE 84 Nano5 Pages
-
PH 8404 Pages
-
PN 9014 Pages
-
SE 3004 Pages
-
SC 1104 Pages
-
SE 2005 Pages
-
ST 164 Pages
-
SE 84LV6 Pages
-
ST 706 Pages
-
SE 705 Pages
-
SPABOND 340LV HT6 Pages
-
SPABOND 3454 Pages
-
SPABOND 3407 Pages
-
SPABOND 340LV6 Pages
