Full General Datasheet SPABOND 335 TOUGHENED GAP FILLING EPOXY ADHESIVE SYSTEM - Temperature performance up to 73°C - High strength and toughness - Formulated for bond lines up to 5mm INTRODUCTION Spabond 335 is a toughened, high performance, thixotropic adhesive, with a simple 2:1 by volume mix ratio. It is a very versatile system suitable for bonding a wide range of materials. The product can be applied in thicknesses of up to 5mm at 20°C on vertical surfaces, without the risk of drainage. With its inherent thixotropic characteristics, Spabond 335 usually needs no further filler addition for most applications. Spabond 335 is available in cartridges and straight-sided pails for machine mixing/dispense. *working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all SP 335 systems

AVAILABILITY The product is available in a number of formats please contact your local customer support or download the latest product catalogue available on www.gurit.com. TRANSPORT & STORAGE The resin and hardeners should be kept in securely closed containers during transport and storage. Any accidental spillage should be soaked up with sand, sawdust, cotton waste or any other absorbent material. The area should then be washed clean (see appropriate Safety Data Sheet). Adequate long term storage conditions will result in a shelf life of 1 year for both the resin and hardeners. Storage should...

This 1 page product summary is intended for use in conjunction with further advice provided under the Instructions for Use section. All data has been generated from typical production material and does not constitute a product specification. MIXING AND HANDLING *working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all SP 335 systems **initial cure of 24 hours at 21°C

This 1 page product summary is intended for use in conjunction with further advice provided under the Instructions for Use section. All data has been generated from typical production material and does not constitute a product specification. MIXING AND HANDLING *working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all SP 335 systems **initial cure of 24 hours at 21°C

This 1 page product summary is intended for use in conjunction with further advice provided under the Instructions for Use section. All data has been generated from typical production material and does not constitute a product specification. MIXING AND HANDLING *working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all SP 335 systems **initial cure of 24 hours at 21°C

NOTICE All advice, instruction or recommendation is given in good faith but the selling Gurit entity (the Company) only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at Gurit's Website: www.gurit.com/terms-and-conditions.aspx The Company strongly recommends that Customers make test panels in the final process conditions and conduct appropriate testing of any goods...