PRODUCT INFORMATION : FORMULATED PRODUCTS DELIVERING THE FUTURE OF COMPOSITE SOLUTIONS FORMULATED PRODUCTS [email protected] www.gurit.com

Ampreg Laminating Systems 5 Multi-Purpose Resin Systems 9 Multi-Purpose Coating Systems 10 Multi-Purpose Primer Systems 11 Resin Infusion Systems 12 Resin Infusion Systems 13 Smartfuse™ Industrial Adhesive 20 In-mould Process Coating Systems 24 Tooling Resin Systems 27 Introduction to Formulated Products 31

INTRODUCTION Introduction to Gurit TYPICAL APPLICATIONS High Performance Marine Boats Gurit pioneered the use of epoxy resin in the manufacture of large light weight, high stress composite structures, by formulating low viscosity systems with long working times before gelation. These systems allow the use of vacuum bagging techniques to be used, which improve the mechanical properties of the finished item by obtaining highly favourable fibre to resin ratios. This reduced void numbers and sizes and improved the interface between resin matrix and the fibres by ensuring they are in intimate contact...

The Ampreg range of wet laminating systems allow a tailored approach to select the appropriate product for a given application giving the required mechanical properties, thermal and chemical resistance. Each system in the range has a number of hardeners which allow for rapid gelation for small repair to exceptionally long for the manufacture of large sandwich structures, even in high ambient temperatures. AMPREG 21 Low Viscosity Laminating System DNV-GL certified Mix ratio (by weight) - Low initial mixed viscosity - Excellent Fibre Wetting- Good cure progression from ambient only...

Premium Wet Laminating System Up to 10 hours working time ¬ Optimum mechanical properties Optimum mechanical properties ¬ High Tg’s from elevated temperature cures INTRODUCTION Ampreg 26 is Gurit’s premium epoxy laminating system, and is particularly suitable for the manufacture of large, high performance composite structures. The product’s high laminate mechanical properties and high Tg’s achievable from modest post-cures, make it well suited for heavily loaded applications, particularly those where a little extra thermal performance is required. Ampreg 26 is optimised for use in hand lay-up...

MULTI-PURPOSE SYSTEMS LU I— co >-CO HANDIPACKRapid Multi-purpose System Rapid curing & multi-purpose Mix ratio (by volume) CO LU oc - Ideal for repairs and other small tasks Simple 2:1 by volume mix ratio CO O Q_ OC 3 Q_ I The Gurit multi-purpose laminating range consists of truly all-purpose systems for gluing, coating, laminating and filling. - Suitable for gluing, coating, laminating and filling - Supplied with dispensing pumps INTRODUCTION Handipack is a multi-purpose epoxy, supplied only in a small pack. It is designed for quick repair work and small scale construction jobs. The system is...

Clear Epoxy Laminating System Up to 1 hour working time Excellent clarity & UV resistance ¬ Rapid fibre wet-out ¬ Good ultra-violet resistance INTRODUCTION SP 115 is a low viscosity, ultra-clear epoxy laminating system. The material also contains UV filters which give the product its characteristic transparent pale violet/blue colour. These filters both enhance the sharpness of graphics, and, when over-coated with a suitable UV-screening PU varnish, will reduce the tendency of clear laminates to yellow after prolonged exposure to sunlight. The product is particularly suitable for use with glass...

RESIN INFUSION SYSTEMS oo LU I— 00 >“ 00 PRIME™ 27 Premium Epoxy Infusion System 100 28 Gurit's PRIME™ infusion resin technology has been used successfully for the single-operation moulding of components ranging from narrow carbon yacht masts, up to 80' yacht hulls and wind turbine blades. PRIME™ epoxy infusion systems are at the forefront of the development of liquid epoxies for "under the bag" infusion processes, such as SCRIMP™, RIFT (resin infusion under flexible tooling), and VARTM (vacuum assisted resin transfer moulding) as well as for RTM production of high-quality structural carbon components....

SMARTFUSE ADHESIVES ADHESIVE SYSTEMS System SPABOND ADHESIVES Spabond adhesives offer outstanding performance in high-stress, high-load applications for Marine, Wind Energy and Civil Engineering applications. Spabond 300 Series: structural, high dynamic load applications Spabond 500 Series: specialist substrate and applications - Spabond 700 Series: for aesthetic carbon laminate applications Please note: A suitable mixing method is required to mix and dispense Spabond™ adhesives. For our range of dispense guns and mix heads, please refer to the Ancillary Products section.

SPABOND 335 Structural 5mm Bond-line Adhesive Ideal for thin bond-lines DNV-GL and Lloyds Register certified SPABOND 340LV HTStructural High Tg Adhesive DNV-GL certified Mix ratio (by volume) - Temperature performance up to 73°C - High Strength & Toughness - Formulated for bond lines up to 5mm INTRODUCTION Spabond 335 is a toughened, high performance, thixotropic adhesive, with a simple 2:1 by volume mix ratio. It is a very versatile system suitable for bonding a wide range of materials. The product has a grease-like consistency, and can be applied in thicknesses of up to 5mm at 20°C on vertical...

SPABOND 540 & 540LV Epoxy to Polyester Bonding Lloyds Register certified SPABOND 570Oily Wood to Epoxy Bonding 90 minute working time - Excellent bond to polyester & epoxy substrates - Exceptional impact toughness & peel strength- Sag resistance of up to 30mm on a vertical face - Low exotherm & shrinkage in thick bond-lines- Resin and Hardener pigmented to give a visual indication of mix quality - Wide range of hardeners, from Fast to Extra-slow - Lloyds Register certified INTRODUCTION Spabond 540 is a modified ambient curing epoxy adhesive designed for bonding polyester...