Specification:
The document outlines the specifications for a high voltage connector with four contacts. The body of the connector is made from 316 stainless steel, with nuts and washers also made from stainless steel. The O-rings are composed of nitrile.

Options:
The connector offers options for cable length and shell material, which can be either stainless steel or titanium.

Material Specification:
The insulation material used is PEEK, while the BH body can be made from 316L stainless steel or titanium. The locking sleeve is made from POM, and the snap ring is stainless steel.

Dimensions and Threads:
Threads are measured in inches, with 1 inch equating to 25.4 mm. Dimensions are provided in millimeters.

Electrical Specification:
The connector supports 500V at 20-40 Amps with a contact area of 6 mm². The contact resistance is less than 0.01Ω, and the insulation resistance is greater than 200 MΩ. The temperature rating is between -4°C and +60°C, and the connector can withstand more than 500 matings.

Depth Rating:
The connector is rated for depths up to 6000 meters.

Contact Material:
The contacts are made from gold-plated brass.